Tripp Lite SMART750RMXL2UN SmartPro 750VA 750W 120V Line-Interactive Sine Wave UPS - 8 Outlets Extended Run Network Card Included LCD USB DB9 2U Rack/Tower UPS Battery Backup

Tripp Lite SMART750RMXL2UN SmartPro 750VA 750W 120V Line-Interactive Sine Wave UPS - 8 Outlets Extended Run Network Card Included LCD USB DB9 2U Rack/Tower

$1,058.84
Manufacturer:Eaton / Tripp Lite
Model:SMART750RMXL2UN
Condition:New
Availability:Out Of Stock
Datasheet

The Tripp Lite SMART750RMXL2UN SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS is a 2U rack/tower mountable unit ideal for protecting critical servers networking equipment and telecom installations. It offers reliable battery backup with sine wave output extended runtime capabilities via optional external battery packs and advanced features like automatic voltage regulation (AVR).

Equipped with a user-friendly LCD interface USB and DB9 communication ports and network management capabilities via the optional WEBCARDLX the SMART750RMXL2UN offers comprehensive power protection and monitoring. It ensures business continuity during power outages and safeguards sensitive equipment from damaging surges and voltage fluctuations.

APPLICATIONS
UPS Applications High-End Desktop/Small Network; Audio/Video; Home Network; Smart Home
COMMUNICATIONS
Communications Cable Micro-USB USB and DB9 cabling included
Communications Interface DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled)
Network Compatibility 10 Mbps; 100 Mbps (Fast Ethernet)
Network Management Card Description Network management card included
Network Monitoring Port RJ45 Network port Micro-USB Configuration/Console port USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules.
Network Monitoring Port Description Pre-installed WEBCARDLXE supports detailed monitoring and management of UPS and site power conditions. Not compatible with WEBCARDLX
Network UPS Tools (NUT) Compatibility NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite
PowerAlert Software For local monitoring via the UPSs built-in communication ports download PowerAlert Office software at https://tripplite.eaton.com/products/power-alert
SNMP Compatibility SNMP V1 V2c V3
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number SMART750RMXL2UN
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
Grounding Details Rear panel grounding lug
High Availability UPS Features Auto Probe Monitoring and Reboot (included); Automatic Voltage Regulation (AVR); Expandable battery backup; Hot swappable batteries; Remote management; Sine wave output; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint) 151
Low Voltage Transfer to Battery Power (Setpoint) 83
Transfer Time 4 milliseconds (AC to battery mode) 2 milliseconds (Battery to AC mode)
OVERVIEW
UPC Code 037332256409
UPS Type Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications CAN/CSA-C22.2 No. 107.3 (Canada); CSA (Canada); ICES (Canada); NOM (Mexico); UL 1778
Product Compliance CE (Europe); FCC Part 15 Class A (USA); RoHS
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 380
EMI / RFI AC Noise Suppression Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Audible Alarm Audible alarm indicates UPS startup power-failure low-battery overload UPS fault and remote shutdown conditions
Front Panel LCD Display Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data plus configuration of voltage operating mode alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
LED Indicators UPS: 3 status-indicating LEDs (normal battery mode alarm/fault); LED colors (green = ON orange = On battery flashing orange = below warning level red = alarm/fault). LX Platform Interface Status: Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing) 100 Mbps (On steady). Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).
Switches 5 pushbutton switches control OFF / ON power status ENTER UP and DOWN selection and ESC control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
VOLTAGE REGULATION
Overvoltage Correction Reduces incoming voltage between 132-151V by 13% (Normal Mode); 138-152V (Extended mode)
Undervoltage Correction Boost incoming voltages between 81-102V by 15% (Normal Mode); 71-92V by 15% (Extended Mode)
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 150V (Normal mode) adjustable to 70-153V (Extended mode)
Battery
Battery Access Front panel battery access door
Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90% (typical full load discharge)
Battery Replacement Description 48V DC Hot-swappable user replaceable batteries
DC System Voltage (VDC) 48
Expandable Runtime Yes
Runtime Full Load (min.) 8.5 min. (750W)
Runtime Half Load (min.) 20.7 min. (375W)
Battery Type Valve Regulated Lead Acid (VRLA)
Details
Category UPS System
Environmental
AC Mode BTU / Hr. (Full Load) 70
AC Mode Efficiency Rating (100% Load) 95%
Audible Noise 45 dBA maximum front side 1m
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load 465
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 0-95% non-condensing
Storage Elevation (ft.) 0-32808
Storage Elevation (m) 0-10000
Storage Temperature Range 5 to 122F (-15 to 50C)
Operating Elevation 0-10000 ft. (0-3000 m)
Input
Input Phase Single-Phase
Maximum Input Amps 8
Nominal Input Voltage Description 80V-151V; adjustable to 70-153V
Nominal Input Voltage(s) Supported 120V AC
Rated input current (Maximum Load) 7.5A
Recommended Electrical Service 15A 120V
UPS Input Connection Type 5-15P
UPS Input Cord Length (ft.) 6
UPS Input Cord Length (m) 1.8
Output
Frequency Compatibility 50 / 60 Hz
Individually Controllable Load Banks Yes
Load Management Receptacles Two switchable two-outlet 5-15R load banks
Nominal Output Voltage(s) Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
Output Capacity (kVA) 0.75
Output Capacity (kW) 0.75
Output Capacity (VA) 750
Output Capacity (Watts) 750
Output Receptacles (8) 5-15R
Output Voltage Regulation (Battery Mode) -10% +6%
Output Voltage Regulation (Line Mode) 120V (-13% +15%)
Power Factor 1
Physical
Cooling Method Fan
Installation Form Factors Supported with Included Accessories 4 post 19 inch rackmount
Minimum Required Rack Depth (cm) 41.15
Minimum Required Rack Depth (inches) 16.2
Minimum Required Rack Depth with External Battery Pack (cm) 51
Minimum Required Rack Depth with External Battery Pack (in.) 20
Minimum Required Rack Depth without External Battery Pack (cm) 53
Minimum Required Rack Depth without External Battery Pack (in.) 21
Mounting Details Included 4-post mounting brackets that enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm). The tower stands are included to support tower orientation.
Primary Form Factor Rackmount
Primary UPS Depth (mm) 334
Primary UPS Height (mm) 88
Primary UPS Width (mm) 441
Shipping Dimensions (hwd / in.) 8.70 x 18.60 x 23.30
Unit Dimensions (hwd / in.) 3.450 x 17.200 x 17.600
UPS Housing Material Steel
UPS Power Module Dimensions (hwd in.) 3.45 x 17.35 x 13.15
UPS Power Module Weight (kg) 16.06
UPS Power Module Weight (lbs.) 35.4
Rack Height 2U
Shipping Weight (kg) 20.64
Warranty
Warranty/Returns 30 Days