Datasheet
The Tripp Lite SMART1500RM2UN is a 1500VA/1350W 2U rackmount UPS system designed to safeguard critical IT equipment from power disruptions. It features automatic voltage regulation (AVR) to correct brownouts and overvoltages without battery drain and a clear LCD interface provides detailed power and status information.
This smart UPS offers versatile connectivity options including USB and DB9 ports for local monitoring and control with support for SNMP/webcard management for remote network access. Ideal for servers network devices and telecom equipment in demanding rackmount environments.
| APPLICATIONS |
| UPS Applications |
Large Network; High-End Desktop/Small Network |
| COMMUNICATIONS |
| Communications Cable |
Micro-USB USB and DB9 cabling included |
| Communications Interface |
DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled) |
| EPO Port |
RJ11 interface jack with 4 meter cable included. Supports normally open and normally closed EPO systems |
| Network Compatibility |
100 Mbps (Fast Ethernet) |
| Network Management Card Description |
Network management card included |
| Network Monitoring Port Description |
Includes Pre-installed WEBCARDLX Network Management interface card. RJ45 Network port Micro-USB Configuration/Console port USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules. |
| Network UPS Tools (NUT) Compatibility |
NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite |
| PowerAlert Software |
For local monitoring via the UPSs built-in Serial or USB communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert |
| SNMP Compatibility |
SNMPv1 V2c V3 |
| WatchDog Compatibility |
Supports Watchdog application OS and hard-reboot restart options for remote applications |
| DETAIILS |
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
SMART1500RM2UN |
| FEATURES & SPECIFICATIONS |
| Cold Start (Startup in Battery Mode During a Power Failure) |
Cold-start operation supported |
| Green Energy-Saving Features |
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks |
| Grounding Details |
Back panel grounding lug |
| High Availability UPS Features |
Auto Probe Monitoring and Reboot (included); Automatic Voltage Regulation (AVR); Hot swappable batteries; Remote management; Surge/noise protection |
| LINE / BATTERY TRANSFER |
| High Voltage Transfer to Battery Power (Setpoint) |
147 |
| Low Voltage Transfer to Battery Power (Setpoint) |
83 |
| Transfer Time |
2-4 milliseconds |
| OVERVIEW |
| UPC Code |
037332178237 |
| UPS Type |
Line-Interactive |
| STANDARDS & COMPLIANCE |
| Product Certifications |
CSA (Canada); NOM (Mexico); UL 1778 |
| Product Compliance |
RoHS; FCC Part 15 Class B (USA) |
| SURGE / NOISE SUPPRESSION |
| AC Suppression Joule Rating |
570 |
| AC Suppression Response Time |
Instantaneous |
| EMI / RFI AC Noise Suppression |
Yes |
| USER INTERFACE ALERTS & CONTROLS |
| Alarm Cancel Operation |
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available |
| Audible Alarm |
Audible alarm indicates UPS startup power-failure low-battery overload UPS fault and remote shutdown conditions |
| Front Panel LCD Display |
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data plus configuration of voltage operating mode alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) |
| LED Indicators |
Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing) 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). |
| Switches |
3 pushbutton switches control OFF / ON power status MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset. |
| VOLTAGE REGULATION |
| Overvoltage Correction |
Input voltages between 128 and 147 are reduced by 12% |
| Undervoltage Correction |
Input voltages between 83 and 107 are boosted by 14% |
| Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 |
| Battery |
| Battery Access |
Front panel battery access door |
| Battery Recharge Rate (Included Batteries) |
Less than 4.5 hours from 10% to 90% (typical full load discharge) |
| Battery Replacement Description |
Hot-swappable user replaceable batteries |
| DC System Voltage (VDC) |
36 |
| Expandable Runtime |
No |
| Runtime Full Load (min.) |
4.5 min. (1350W) |
| Runtime Half Load (min.) |
13 min. (675W) |
| Battery Type |
Valve Regulated Lead Acid (VRLA) |
| Details |
| Category |
UPS System |
| Environmental |
| AC Mode BTU / Hr. (Full Load) |
267 |
| AC Mode Efficiency Rating (100% Load) |
95% |
| Audible Noise |
45 dBA maximum front side 1m |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load |
1012 |
| Operating Temperature Range |
32 to 104F (0 to 40C) |
| Relative Humidity |
0-95% non-condensing |
| Storage Temperature Range |
5 to 122F (-15 to 50C) |
| Input |
| Input Circuit Breakers |
15A |
| Input Phase |
Single-Phase |
| Maximum Input Amps |
12 |
| Nominal Input Voltage(s) Supported |
120V AC |
| Rated input current (Maximum Load) |
12A |
| Recommended Electrical Service |
15A 120V |
| UPS Input Connection Type |
5-15P |
| UPS Input Cord Length (ft.) |
10 |
| UPS Input Cord Length (m) |
3.1 |
| Output |
| Frequency Compatibility |
60 Hz |
| Individually Controllable Load Banks |
Yes |
| Load Management Receptacles |
Two switchable two-outlet 5-15R load banks |
| Nominal Output Voltage(s) Supported |
110V; 115V; 120V |
| Nominal Voltage Details |
120v nominal output in battery mode |
| Output AC Waveform (AC Mode) |
Sine wave |
| Output AC Waveform (Battery Mode) |
Pure Sine wave |
| Output Capacity (kVA) |
1.5 |
| Output Capacity (kW) |
1.35 |
| Output Capacity (VA) |
1500 |
| Output Capacity (Watts) |
1350 |
| Output Receptacles |
(8) 5-15R |
| Output Voltage Regulation (Battery Mode) |
+/- 5% |
| Output Voltage Regulation (Line Mode) |
-21% +8% |
| Power Factor |
0.9 |
| Physical |
| Cooling Method |
Fan |
| Installation Form Factors Supported with Included Accessories |
4 post 19 inch rackmount |
| Minimum Required Rack Depth (cm) |
43.18 |
| Minimum Required Rack Depth (inches) |
17 |
| Mounting Details |
Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) |
| Primary Form Factor |
Rackmount |
| Primary UPS Depth (mm) |
342 |
| Primary UPS Height (mm) |
88 |
| Primary UPS Width (mm) |
439 |
| Shipping Dimensions (hwd / cm) |
21.59 x 59.18 x 49.78 |
| Shipping Dimensions (hwd / in.) |
8.50 x 23.30 x 19.60 |
| Unit Weight (kg) |
21.09 |
| Unit Weight (lbs.) |
46.5000 |
| UPS Housing Material |
Steel |
| UPS Power Module Dimensions (hwd cm) |
8.76 x 43.94 x 34.16 |
| UPS Power Module Dimensions (hwd in.) |
3.45 x 17.3 x 13.45 |
| UPS Power Module Weight (kg) |
21.09 |
| UPS Power Module Weight (lbs.) |
46.5 |
| Rack Height |
2U |
| Shipping Weight (kg) |
26.74 |
| Shipping Weight (lbs.) |
58.95 |
| Warranty |
| Warranty/Returns |
30 Days |
