Call us: 713-597-6988
Email: [email protected]
0 item(s)$0.00 Shopping cart

  • Your shopping cart is empty!

Tripp Lite SMART1500 SmartPro 120V 1.5kVA 980W Line-Interactive UPS Tower USB DB9 6 Outlets UPS Battery Backup

Tripp Lite SMART1500 SmartPro 120V 1.5kVA 980W Line-Interactive UPS Tower USB DB9 6 Outlets

$641.18
Manufacturer:Eaton / Tripp Lite
Model:SMART1500
Condition:New
Availability:In Stock
The Tripp Lite SMART1500 UPS safeguards equipment with 1500VA/980W battery backup AVR and surge protection. Offers USB DB9 and SNMP connectivity for network management.
Datasheet

The Tripp Lite SMART1500 UPS System provides 1500VA/980W of reliable battery backup power automatic voltage regulation (AVR) and surge suppression for connected devices like servers and workstations. This tower UPS ensures continuous operation during power outages protecting against data loss and equipment damage.

Featuring USB DB9 serial and SNMP connectivity the SMART1500 allows for convenient network management and monitoring of UPS status. It offers comprehensive power protection for critical systems in diverse IT environments.

APPLICATIONS
UPS Applications Large Network; High-End Desktop/Small Network
COMMUNICATIONS
Communications Cable USB and DB9 cabling included
Communications Interface USB; DB9 Serial
Network Management Card Description Network management not supported
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPSs built-in communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert
WatchDog Compatibility Supports Watchdog application OS and hard-reboot restart options for remote applications
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number SMART1500
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
High Availability UPS Features Automatic Voltage Regulation (AVR); Hot swappable batteries; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint) 147
Low Voltage Transfer to Battery Power (Setpoint) 75
Transfer Time 2-4 milliseconds
OVERVIEW
UPC Code 037332115812
UPS Type Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications CSA (Canada); NOM (Mexico); UL 1778
Product Compliance RoHS; FCC Part 15 Class A (USA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 510
AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power-failure overload and low-battery conditions
LED Indicators 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
VOLTAGE REGULATION
Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%
Severe Undervoltage Correction Input voltages between 75 and 92 are boosted by 30%
Undervoltage Correction Input voltages between 93 and 107 are boosted by 14%
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Battery
Battery Access Battery access door
Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% (typical full load discharge)
Battery Replacement Description Hot-swappable user replaceable batteries
DC System Voltage (VDC) 36
Expandable Runtime No
Runtime Full Load (min.) 7 min. (980W)
Runtime Half Load (min.) 20 min. (490W)
Battery Type Valve Regulated Lead Acid (VRLA)
Details
Category UPS System
Environmental
AC Mode BTU / Hr. (Full Load) 139
AC Mode Efficiency Rating (100% Load) 96%
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load 456
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 0-95% non-condensing
Storage Temperature Range 5 to 122F (-15 to 50C)
Input
Input Circuit Breakers 15A
Input Phase Single-Phase
Maximum Input Amps 12
Nominal Input Voltage(s) Supported 120V AC
Rated input current (Maximum Load) 12A
Recommended Electrical Service 15A 120V
UPS Input Connection Type 5-15P
UPS Input Cord Length (ft.) 7
UPS Input Cord Length (m) 2.1
Output
Frequency Compatibility 60 Hz
Individually Controllable Load Banks Yes
Load Management Receptacles One switchable single-outlet 5-15R load bank
Nominal Output Voltage(s) Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
Output Capacity (kVA) 1.5
Output Capacity (kW) 0.98
Output Capacity (VA) 1500
Output Capacity (Watts) 980
Output Receptacles (6) 5-15R
Output Voltage Regulation (Battery Mode) +/- 5%
Output Voltage Regulation (Line Mode) -18% +8%
Physical
Cooling Method Fan
Installation Form Factors Supported with Included Accessories Tower
Primary Form Factor Tower
Primary UPS Depth (mm) 235
Primary UPS Height (mm) 324
Primary UPS Width (mm) 191
Shipping Dimensions (hwd / cm) 43.43 x 28.19 x 33.02
Shipping Dimensions (hwd / in.) 17.10 x 11.10 x 13.00
Unit Weight (kg) 17.69
Unit Weight (lbs.) 39.0000
UPS Housing Material PVC
UPS Power Module Dimensions (hwd cm) 32.38 x 19.05 x 23.50
UPS Power Module Dimensions (hwd in.) 12.75 x 7.5 x 9.25
UPS Power Module Weight (kg) 17.69
UPS Power Module Weight (lbs.) 39
Shipping Weight (kg) 18.37
Shipping Weight (lbs.) 40.50
Warranty
Warranty/Returns 30 Days

Related Products

Tripp Lite SMART1500RM2UN SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS 2U Rack/Tower WEBCARDLX Network Interface LCD USB 8 Outlets

Tripp Lite SMART1500RM2UN SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS 2U Rack/Tower WEBCARDLX Network Interface LCD USB 8 Outlets