Meraki MR55 Wireless Access Point Appliances

Meraki MR55 Wireless Access Point

$1,331.06
Manufacturer:Meraki
Model:MR55-HW
Condition:New
Availability:Backorder

Available Options

The Cisco Meraki MR55 is a cloud-managed 8x8:8 802.11ax compatible access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR55 offers high throughput, enterprise-grade security, and simple management. The MR55 provides a maximum of 5.9 Gbps aggregate frame rate with concurrent 2.4 Ghz and 5 Ghz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing. With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR55 makes an outstanding platform for the most demanding of uses

802.11ac Wave 2 and 802.11n Capabilities
802.11ac Wave 2 And 802.11n Capabilities 4 x 4 multiple input, multiple output (MIMO) with four spatial streams, SU-MIMO and MU-MIMO support, Maximal ratio combining (MRC) & beamforming, 20 and 40 MHz channels (802.11n); 20, 40, 80, and 160 MHz channels (802.11ac), Up to 256-QAM on both 2.4 GHz & 5 GHz bands, Packet aggregation
Analytics
Analytics Embedded location analytics reporting and device tracking, Global L7 traffic analytics reporting per network, per device, & per application
Antenna
Antenna Integrated omni-directional antennas (5.5 dBi gain @ 2.4 GHz, 6.2 dBi gain @ 5 GHz), Individual antenna elements for each radio
Environment
Operating Temperature 32 °F to 104 °F (0 °C to 40 °C), Humidity
Interfaces
Interfaces 1x 100/1000/2.5G BASE-T Ethernet & 1x 10/100/1000 BASE-T Ethernet (RJ45) ,1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mobility
Mobility PMK, OKC, & 802.11r for fast Layer 2 roaming, Distributed or centralized layer 3 roaming
Mounting
Mounting All standard mounting hardware included, Desktop, ceiling, and wall mount capable, Ceiling tile rail (9/16, 15/16 or 1 .5" flush or recessed rails), assorted cable junction boxes, Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Dimensions
Physical Dimensions 10.56" x 6.38" x 1.58" (268.2 mm x 162.0 mm x 38.8 mm), not including deskmount feet or mount plate, Weight- 29.6 oz (840g)
Physical Security
Physical Security Two security screw options (included), Kensington lock hard point, Concealed mount plate with anti-tamper cable bay
Power
Power Over Ethernet 37 - 57 V (802.3at required; functionality-restricted 802.3af mode, supported), Alternative 12 V DC input, Power consumption
Quality of Service
Quality Of Service Advanced Power Save (U-APSD), WMM Access Categories with DSCP and 802.1p support, Layer 7 application traffic identification and shaping
Radios
Radios 2.4 GHz 802.11b/g/n client access radio, 5 GHz 802.11a/n/ac client access radio, 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio, 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support, Concurrent operation of all four radios, Supported frequency bands (country-specific restrictions apply)<ul><li>2.412-2.484 GHz<li>5.150-5.250 GHz (UNII-1)5.250-5.350 GHZ (UNII-2)<li>5.470-5.600, 5.660-5.725 GHz (UNII-2e)<li>5.725 -5.825 GHz (UNII-3)</ul>
Security
Security Integrated Layer 7 firewall with mobile device policy management, Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal, Flexible guest access with device isolation, VLAN tagging (802.1q) and tunneling with IPsec VPN, PCI compliance reporting, WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM, TKIP and AES encryption, Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration, Cisco ISE integration for Guest access and BYOD Posturing
Warranty
Warranty Lifetime hardware warranty with advanced replacement included