Meraki MR42E Cloud Managed AP
The Cisco Meraki MR42E is a cloud-managed 3x3 MIMO 802.11ac Wave 2 access point. Designed for general purpose deployments in offices, schools, shops, and hotels, the MR42E provides performance, security, and manageability. The MR42E provides a maximum 1.9 Gbps frame rate with concurrent 802.11ac Wave 2 and 802.11n 3x3:3 MIMO radios, and security and spectrum visibility via a third radio dedicated to 24x7 WIDS/WIPS and automated RF optimization. An integrated Bluetooth low energy (BLE) radio delivers Beacon functionality and BLE device scanning.
The MR42E supports a variety of smart, auto-detectable external antenna that can deliver both focused, targeted coverage in challenging RF scenarios as well as broader coverage in a variety of environments, including those with very high ceilings. These antenna include panel and panel downtilt omni-directionals, wide patch, and narrow patch options.
The combination of cloud management, 802.11ac Wave 2, full-time RF environment scanning, and an integrated Bluetooth technology delivers the high throughput, reliability, and flexibility required by the most demanding business applications like voice and high-definition streaming video, both today and tomorrow.
|802.11ac Wave 2 and 802.11n Capabilities|
|802.11ac Wave 2 And 802.11n Capabilities||2 x 2 multiple input, multiple output (MIMO) with two spatial streams, SU-MIMO and MU-MIMO support, Maximal ratio combining (MRC) & Beamforming, 20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac), Up to 256 QAM on both 2.4 GHz and 5 GHz bands, Packet aggregation|
|Antenna||Integrated omni-directional antennas (3.8 dBi gain at 2.4 GHz, 3.9 dBi gain at 5 GHz)|
|Operating Temperature||32 °F to 104 °F (0 °C to 40 °C), Humidity- 5 to 95%|
|Interfaces||1x 10/100/1000 BASE-T Ethernet (RJ45), 1x DC power connector (5.5 mm x 2.5 mm, center positive)|
|LED Indicators||2 Ethernet status, 1 power/booting/firmware upgrade status|
|Mobility||PMK, OKC, and 802.11r for fast Layer 2 roaming, Distributed or centralized layer 3 roaming|
|Mounting||All standard mounting hardware included, Desktop, ceiling, and wall mount capable, Ceiling tile rail (9/16, 15/16 or 1 .5" flush or recessed rails), assorted cable junction boxes, Bubble level on mounting cradle for accurate horizontal wall mounting|
|Physical Dimensions||8.5" x 4.3" x 1.3" (215 mm x 110 mm x 32 mm), not including deskmount feet or mount plate, Weight|
|Physical Security||Two security screw options (included), Kensington lock hard point, Concealed mount plate with anti-tamper cable bay|
|Power||Power over Ethernet|
|Quality of Service|
|Quality Of Service||Advanced Power Save (U-APSD), WMM Access Categories with DSCP and 802.1p support, Layer 7 application traffic identification and shaping|
|Radios||2.4 GHz 802.11b/g/n/ac client access radio, 5 GHz 802.11a/n/ac client access radio, 2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio, 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support, Concurrent operations of all four radios, Supported frequency bands (country-specific restrictions apply)
|Security||Integrated layer 7 firewall with mobile device policy management, Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal, Flexible guest access with device isolation, VLAN tagging (802.1Q) and tunneling with IPSec VPN, PCI compliance reporting, WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM, TKIP and AES encryption, Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration|
|Warranty||Lifetime hardware warranty with advanced replacement included|