Tripp Lite SU3000LCD2UHVTF SmartOnline 208/120V UPS With Step-Down Transformer - On-Line Double-Conversion 3000VA 2700W 4U Network Card Option
$3,539.39
Manufacturer:Eaton / Tripp Lite
Model:SU3000LCD2UHVTF
Condition:New
Availability:In Stock
Condition:New
Availability:In Stock
- Power Protection
- Eaton / Tripp Lite
- UPS System
- SmartOnline Series
- UPS Battery Backup
- Search
- Tripp Lite SU3000LCD2UHVTF SmartOnline 208/120V UPS With Step-Down Transformer - On-Line Double-Conversion 3000VA 2700W 4U Network Card Option
Datasheet
The Tripp Lite SU3000LCD2UHVTF SmartOnline 208/120V UPS with Step-Down Transformer offers premium double-conversion power protection for critical equipment. Delivering 3000VA/2700W in a 4U rackmount form factor this UPS safeguards against outages surges and voltage fluctuations ensuring continuous operation.
Featuring online double-conversion technology the SU3000LCD2UHVTF isolates connected equipment from raw utility power providing consistent conditioned output. It supports network management capabilities via an optional network card for remote monitoring and control. The step-down transformer allows for compatibility with 208V input and 120V output requirements.
| APPLICATIONS | |
| UPS Applications | High-End Desktop/Small Network |
| COMMUNICATIONS | |
| Communications Cable | USB and DB9 cabling included |
| Communications Interface | Contact closure; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled) |
| Network Management Card Description | Network management card optional |
| Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 plus assignable contact closure pin functions for On-battery On bypass Output-on and Low-battery conditions and remote Shutdown Output-off Reboot and Power-toggle operations |
| PowerAlert Software | For local monitoring via the UPSs built-in communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert |
| WatchDog Compatibility | Supports Watchdog application OS and hard-reboot restart options for remote applications |
| DETAIILS | |
| Manufacturer | Tripp Lite |
| Manufacturer Part Number | SU3000LCD2UHVTF |
| FEATURES & SPECIFICATIONS | |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Green Energy-Saving Features | High efficiency economy mode operation; Individually controllable load banks |
| Grounding Details | Back panel grounding lug included |
| High Availability UPS Features | Automatic inverter bypass; Hot swappable batteries; Remote management; Surge/noise protection; Zero transfer time; Auto Probe Monitoring (requires WEBCARDLXE) |
| LINE / BATTERY TRANSFER | |
| High Voltage Transfer to Battery Power (Setpoint) | 288V |
| Low Voltage Transfer to Battery Power (Setpoint) | 160V (100% load) 140V (66% load) 120V (33% load) |
| Transfer Time | 0 ms |
| OVERVIEW | |
| UPC Code | 037332241719 |
| UPS Type | On-Line |
| STANDARDS & COMPLIANCE | |
| Product Certifications | CSA (Canada); UL 1778 |
| Product Compliance | RoHS; FCC Part 15 Class A (USA) |
| SURGE / NOISE SUPPRESSION | |
| AC Suppression Joule Rating | 570 |
| AC Suppression Response Time | Instantaneous |
| EMI / RFI AC Noise Suppression | Yes |
| UPS Dataline Suppression Details | Single line dialup / network dataline protection included |
| USER INTERFACE ALERTS & CONTROLS | |
| Alarm Cancel Operation | Power-fail alarm can be silenced by following on-screen prompts |
| Audible Alarm | Audible alarm indicates power failure low battery overload and fault |
| Front Panel LCD Display | Interactive front-panel LCD interface reports UPS operating mode detailed UPS status and site-power information; LCD interface also enables a variety of advanced UPS setup and configuration options |
| LED Indicators | 4 front panel LEDs: AC input (green) AC output (green) Battery (yellow) Fault (red) |
| Switches | 5 front panel switches: On/Off Up Down and Escape |
| VOLTAGE REGULATION | |
| Overvoltage Correction | 2% output voltage regulation during overvoltages to 288 |
| Undervoltage Correction | 2% output voltage regulation during undervoltages to 160V (100% load) 130V (70% load) 100V (30% load) |
| Voltage Regulation Description | Online double-conversion power conditioning |
| Battery | |
| Battery Access | Front panel battery access door |
| Battery Recharge Rate (Included Batteries) | 3.0 hours from 10% to 90% (typical full load discharge) |
| Battery Replacement Description | Hot-swappable replaceable batteries |
| DC System Voltage (VDC) | 72 |
| Expandable Runtime | Yes |
| Runtime Full Load (min.) | 5 min. (2700W) |
| Runtime Half Load (min.) | 13.5 min. (1350W) |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Details | |
| Category | UPS System |
| Environmental | |
| AC Economy Mode BTU / Hr. (Full Load) | 588 |
| AC Economy Mode Efficiency Rating (100% Load) | >95% |
| AC Mode BTU / Hr. (Full Load) | 933 |
| AC Mode Efficiency Rating (100% Load) | >90% |
| Audible Noise | <50dB at front side 1M |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load | 1399 |
| Online Mode Heat Dissipation (BTU/Hr) @ Full Load | 933 |
| Operating Temperature Range | 32 to 104F (0 to 40C) |
| Relative Humidity | 5 to 95% non-condensing |
| Storage Temperature Range | 5 to 122F (-15 to 50C) |
| Input | |
| Input Phase | Single-Phase |
| Maximum Input Amps | 15 |
| Nominal Input Voltage(s) Supported | 208V AC |
| Rated input current (Maximum Load) | 14.97A |
| Recommended Electrical Service | 208V 20A |
| UPS Input Connection Type | L6-20P |
| UPS Input Cord Length (ft.) | 10 |
| UPS Input Cord Length (m) | 3.1 |
| Output | |
| Crest Factor | 3:1 |
| Frequency Compatibility | 60 Hz |
| Frequency Compatibility Details | IMPORTANT! Please ensure the UPS is configured for 60Hz output when used with the included step-down transformer module |
| Individually Controllable Load Banks | Yes |
| Load Management Receptacles | Two switchable outlet load banks (2 NEMA 6-15/20R outlets per bank) |
| Nominal Output Voltage(s) Supported | 120V; 208V |
| Nominal Voltage Details | IMPORTANT! Please ensure the UPS is configured for 208V output when used with the included step-down transformer module |
| Output AC Waveform (AC Mode) | Pure Sine wave |
| Output AC Waveform (Battery Mode) | Pure Sine wave |
| Output Capacity (kVA) | 3 |
| Output Capacity (kW) | 2.7 |
| Output Capacity (VA) | 3000 |
| Output Capacity (Watts) | 2700 |
| Output Capacity Details | OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously 125% for 3 minutes 150% for 30 seconds and >150% for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits). |
| Output Circuit Breakers | Included 2U transformer module includes four 20A 120V circuit breakers (each protects 3 NEMA 5-15/20R outlets). |
| Output Receptacles | (12) 5-15/20R; (6) 6-15/20R; (2) L6-20R |
| Output Voltage Regulation (Battery Mode) | +/- 2% |
| Output Voltage Regulation (Economy Line Mode) | +/- 10% |
| Output Voltage Regulation (Line Mode) | +/- 2% |
| Power Factor | 0.9 |
| Physical | |
| Cooling Method | Fan |
| Installation Form Factors Supported with Included Accessories | 4 post 19 inch rackmount |
| Minimum Required Rack Depth (cm) | 71.12 |
| Minimum Required Rack Depth (inches) | 28 |
| Minimum Required Rack Depth with External Battery Pack (cm) | 77 |
| Minimum Required Rack Depth with External Battery Pack (in.) | 30.25 |
| Minimum Required Rack Depth without External Battery Pack (cm) | 74 |
| Minimum Required Rack Depth without External Battery Pack (in.) | 29.25 |
| Mounting Details | 4 post installation accessories included (2 sets) |
| Primary Form Factor | Rackmount |
| Primary UPS Depth (mm) | 616 |
| Primary UPS Height (mm) | 177 |
| Primary UPS Width (mm) | 440 |
| Shipping Dimensions (hwd / in.) | 37.75 x 40.00 x 48.00 |
| Unit Dimensions (hwd / in.) | 6.960 x 17.320 x 24.250 |
| Unit Weight (kg) | 60.70 |
| Unit Weight (lbs.) | 133.820 |
| UPS Housing Material | Metal |
| UPS Power Module Dimensions (hwd in.) | 6.96 x 17.34 x 24.25 |
| UPS Power Module Weight (kg) | 60.70 |
| UPS Power Module Weight (lbs.) | 133.82 |
| Rack Height | 4U |
| Shipping Weight (kg) | 87.09 |
| Warranty | |
| Warranty/Returns | 30 Days |