Tripp Lite SMX700HG SmartPro 230V 700VA 450W Medical-Grade Line-Interactive Tower UPS with 6 Outlets Full Isolation USB DB9
$786.85
Manufacturer:Eaton / Tripp Lite
Model:SMX700HG
Condition:New
Availability:In Stock
Condition:New
Availability:In Stock
- Power Protection
- Eaton / Tripp Lite
- UPS System
- SMX Series
- UPS Battery Backup
- Tripp Lite SMX700HG SmartPro 230V 700VA 450W Medical-Grade Line-Interactive Tower UPS with 6 Outlets Full Isolation USB DB9
Datasheet
The Tripp Lite SMX700HG SmartPro Medical Grade UPS System safeguards critical medical equipment against power disruptions. Providing 700VA/420W of line-interactive power protection in a 230V environment this tower UPS ensures continuous operation during outages and voltage fluctuations. The full isolation feature enhances protection against electrical noise and surges.
Equipped with both USB and serial ports the SMX700HG offers versatile communication options for monitoring and controlling the UPS. This smart UPS is designed to meet the stringent demands of healthcare environments ensuring reliable performance for connected medical devices.
| APPLICATIONS | |
| UPS Applications | Hospital/Medical |
| COMMUNICATIONS | |
| Communications Interface | USB; DB9 Serial |
| Network Management Card Description | Network management not supported |
| DETAIILS | |
| Manufacturer | Tripp Lite |
| Manufacturer Part Number | SMX700HG |
| FEATURES & SPECIFICATIONS | |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Grounding Details | Equipotential connection (back panel grounding lug) |
| High Availability UPS Features | Surge/noise protection |
| LINE / BATTERY TRANSFER | |
| High Voltage Transfer to Battery Power (Setpoint) | 274 |
| Low Voltage Transfer to Battery Power (Setpoint) | 155 |
| Transfer Time | 5 milliseconds |
| OVERVIEW | |
| UPC Code | 037332140418 |
| UPS Type | Line-Interactive |
| STANDARDS & COMPLIANCE | |
| Product Certifications | UL 60601-1 |
| Product Compliance | RoHS; CE (Europe) |
| SURGE / NOISE SUPPRESSION | |
| AC Suppression Joule Rating | 340 |
| AC Suppression Response Time | Instantaneous |
| EMI / RFI AC Noise Suppression | Yes |
| USER INTERFACE ALERTS & CONTROLS | |
| Audible Alarm | 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds) overload (continuous short beeps) and low battery (continuous tone). Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure overload conditions and Low Battery events using our Free PowerAlert UPS management software. |
| LED Indicators | 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status |
| Switches | Yes includes 2 front panel mounted push-button switches for system enable self-test and alarm cancel functions |
| VOLTAGE REGULATION | |
| Overvoltage Correction | Input voltages between 206 and 245V AC are reduced by 9% |
| Severe Undervoltage Correction | Input voltages between 155 and 182 are boosted by 21% |
| Undervoltage Correction | Input voltages between 183 and 199 are boosted by 10% |
| Voltage Regulation Description | Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable computer grade output without consuming battery power over an input voltage range of 155 to 274V AC |
| Battery | |
| Battery Access | Battery access door allows hot swap battery replacement without powering connected equipment off |
| Battery Recharge Rate (Included Batteries) | Less than 3.6 hours from 10% to 90% (typical full load discharge) |
| DC System Voltage (VDC) | 36 |
| Expandable Runtime | No |
| Runtime Full Load (min.) | 14.5 min. (450W) |
| Runtime Half Load (min.) | 36 min. (225W) |
| Typical Battery Lifespan | 3-6 years depending on usage |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Details | |
| Category | UPS System |
| Environmental | |
| AC Mode BTU / Hr. (Full Load) | 208.6 |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load | 189.1 |
| Operating Temperature Range | 32 to 104F (0 to 40C) |
| Relative Humidity | 0-95% non-condensing |
| Storage Temperature Range | 5 to 122F (-15 to 50C) |
| Input | |
| Input Phase | Single-Phase |
| Maximum Input Amps | 4 |
| Nominal Input Voltage(s) Supported | 230V AC |
| Rated input current (Maximum Load) | 3.6A |
| Recommended Electrical Service | 10A 230V |
| UPS Input Connection Type | C14 inlet |
| UPS Input Cord Length (ft.) | 0.50 |
| UPS Input Cord Length (m) | 0.2 |
| Voltage Compatibility (VAC) | 230 |
| Output | |
| Frequency Compatibility | 50 / 60 Hz |
| Frequency Compatibility Details | Automatic frequency selection |
| Individually Controllable Load Banks | No |
| Nominal Output Voltage(s) Supported | 220V; 230V; 240V |
| Nominal Voltage Details | 230v nominal inverter output voltage |
| Output AC Waveform (Battery Mode) | PWM sine wave |
| Output Capacity (kVA) | 0.7 |
| Output Capacity (kW) | 0.45 |
| Output Capacity (VA) | 700 |
| Output Capacity (Watts) | 450 |
| Output Receptacles | (6) C13 |
| Output Voltage Regulation (Line Mode) | -18% +8% |
| Physical | |
| Cooling Method | Cooling via rear-exit cooling fan |
| Installation Form Factors Supported with Included Accessories | Tower |
| Primary Form Factor | Tower |
| Primary UPS Depth (mm) | 229 |
| Primary UPS Height (mm) | 325 |
| Primary UPS Width (mm) | 191 |
| Shipping Dimensions (hwd / cm) | 46.99 x 30.99 x 33.99 |
| Shipping Dimensions (hwd / in.) | 18.50 x 12.20 x 13.38 |
| Unit Weight (kg) | 19.10 |
| Unit Weight (lbs.) | 42.1000 |
| UPS Housing Material | PVC |
| UPS Power Module Dimensions (hwd cm) | 32.51 x 19.05 x 22.86 |
| UPS Power Module Dimensions (hwd in.) | 12.8 x 7.5 x 9 |
| UPS Power Module Weight (kg) | 19.10 |
| UPS Power Module Weight (lbs.) | 42.1 |
| Shipping Weight (kg) | 20.59 |
| Shipping Weight (lbs.) | 45.40 |
| Warranty | |
| Warranty/Returns | 30 Days |