Tripp Lite SMART750RM1U SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS 1U Rack/Vertical Network Management Card Options USB DB9 Serial
$604.84
Manufacturer:Eaton / Tripp Lite
Model:SMART750RM1U
Condition:New
Availability:In Stock
Condition:New
Availability:In Stock
- Power Protection
- Eaton / Tripp Lite
- UPS System
- SMART Series
- UPS Battery Backup
- Search
- Tripp Lite SMART750RM1U SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS 1U Rack/Vertical Network Management Card Options USB DB9 Serial
Datasheet
The Tripp Lite SMART750RM1U is a 750VA/600W line-interactive UPS designed for 1U rack mounting. It provides reliable battery backup and surge protection for connected equipment ensuring business continuity during power outages. The unit features automatic voltage regulation (AVR) to correct brownouts and overvoltages without battery drain.
This SMART750RM1U offers USB and DB9 communication ports for convenient monitoring and control. Its compact 1U form factor makes it ideal for space-constrained IT environments safeguarding critical servers and networking equipment.
| APPLICATIONS | |
| UPS Applications | Large Network; High-End Desktop/Small Network; Retail/Point of Sale; Hospitality |
| COMMUNICATIONS | |
| Communications Cable | USB and DB9 cabling included |
| Communications Interface | DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB |
| Network Management Card Description | Network management card optional |
| Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions |
| PowerAlert Software | For local monitoring via the UPSs built-in communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert |
| WatchDog Compatibility | Supports Watchdog application OS and hard-reboot restart options for remote applications |
| DETAIILS | |
| Manufacturer | Tripp Lite |
| Manufacturer Part Number | SMART750RM1U |
| FEATURES & SPECIFICATIONS | |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Grounding Details | Back panel grounding lug |
| High Availability UPS Features | Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Hot swappable batteries; Remote management; Surge/noise protection |
| LINE / BATTERY TRANSFER | |
| High Voltage Transfer to Battery Power (Setpoint) | 147 |
| Low Voltage Transfer to Battery Power (Setpoint) | 83 |
| Transfer Time | 5 milliseconds AC to DC; 1 millisecond DC to AC |
| OVERVIEW | |
| UPC Code | 037332118813 |
| UPS Type | Line-Interactive |
| STANDARDS & COMPLIANCE | |
| Product Certifications | CSA (Canada); NOM (Mexico); UL 1778 |
| Product Compliance | RoHS; FCC Part 15 Class A (USA) |
| SURGE / NOISE SUPPRESSION | |
| AC Suppression Joule Rating | 450 |
| AC Suppression Response Time | Instantaneous |
| EMI / RFI AC Noise Suppression | Yes |
| USER INTERFACE ALERTS & CONTROLS | |
| Alarm Cancel Operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced alarm will re-sound to indicate low-battery status |
| Audible Alarm | Audible alarm indicates power-failure overload and low-battery conditions |
| LED Indicators | 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status |
| Switches | 3 position rocker switch enables on/off power control plus "remote" setting which enables inverter to be remotely powered on or off when used in conjunction with Remote Control Module (sold separately). |
| VOLTAGE REGULATION | |
| Overvoltage Correction | Input voltages between 128 and 147 are reduced by 12% |
| Undervoltage Correction | Input voltages between 83 and 107 are boosted by 14% |
| Voltage Regulation Description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 |
| Battery | |
| Battery Access | Front panel battery access door |
| Battery Recharge Rate (Included Batteries) | Less than 4 hours from 10% to 90% (typical full load discharge) |
| Battery Replacement Description | Hot-swappable user replaceable batteries |
| DC System Voltage (VDC) | 24 |
| Expandable Runtime | No |
| Runtime Full Load (min.) | 4.9 min. (600W) |
| Runtime Half Load (min.) | 13.2 min. (300W) |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Details | |
| Category | UPS System |
| Environmental | |
| AC Mode BTU / Hr. (Full Load) | 38 |
| AC Mode Efficiency Rating (100% Load) | 98% |
| Audible Noise | 45 dBA maximum front side 1m |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load | 545 |
| Operating Temperature Range | 32 to 104F (0 to 40C) |
| Relative Humidity | 0-95% non-condensing |
| Storage Temperature Range | 5 to 122F (-15 to 50C) |
| Input | |
| Input Circuit Breakers | 15A |
| Input Cord Length (ft.) | 10 |
| Input Cord Length (m) | 3.05 |
| Input Phase | Single-Phase |
| Maximum Input Amps | 7 |
| Nominal Input Voltage(s) Supported | 120V AC |
| Rated input current (Maximum Load) | 7A |
| Recommended Electrical Service | 15A 120V |
| UPS Input Connection Type | 5-15P |
| Output | |
| Frequency Compatibility | 60 Hz |
| Individually Controllable Load Banks | Yes |
| Load Management Receptacles | Two switchable single-outlet 5-15R load banks |
| Nominal Output Voltage(s) Supported | 110V; 115V; 120V |
| Nominal Voltage Details | 120v nominal output in battery mode |
| Output AC Waveform (AC Mode) | Sine wave |
| Output AC Waveform (Battery Mode) | Pure Sine wave |
| Output Capacity (kVA) | 0.75 |
| Output Capacity (kW) | 0.6 |
| Output Capacity (VA) | 750 |
| Output Capacity (Watts) | 600 |
| Output Receptacles | (6) 5-15R |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Output Voltage Regulation (Line Mode) | -21% +8% |
| Power Factor | 0.8 |
| Physical | |
| Cooling Method | Fan |
| Installation Form Factors Supported with Included Accessories | 2 post 19 inch rackmount; 2 post front mount; 4 post 19 inch rackmount |
| Minimum Required Rack Depth (cm) | 50.80 |
| Minimum Required Rack Depth (inches) | 20 |
| Mounting Details | Included mounting brackets provide front-rail installation in 2 or 4 post racks; For additional stability in 4 post racks consider optional 4 post mounting accessories 4POSTRAILKIT1U & 4POSTRAILKITWM |
| Primary Form Factor | Rackmount; Vertical |
| Primary UPS Depth (mm) | 425 |
| Primary UPS Height (mm) | 44 |
| Primary UPS Width (mm) | 445 |
| Shipping Dimensions (hwd / cm) | 13.21 x 58.67 x 52.58 |
| Shipping Dimensions (hwd / in.) | 5.20 x 23.10 x 20.70 |
| Unit Weight (kg) | 13.61 |
| Unit Weight (lbs.) | 30.0000 |
| UPS Housing Material | Steel |
| UPS Power Module Dimensions (hwd cm) | 4.44 x 44.45 x 42.54 |
| UPS Power Module Dimensions (hwd in.) | 1.75 x 17.5 x 16.75 |
| UPS Power Module Weight (kg) | 13.61 |
| UPS Power Module Weight (lbs.) | 30 |
| Rack Height | 1U |
| Shipping Weight (kg) | 15.47 |
| Shipping Weight (lbs.) | 34.10 |
| Warranty | |
| Warranty/Returns | 30 Days |