Call us: 713-597-6988
Email: [email protected]
0 item(s)$0.00 Shopping cart

  • Your shopping cart is empty!

Tripp Lite SMART700HGL SmartPro 120V 700VA 450W Medical-Grade Line-Interactive Tower UPS with 4 Outlets Full Isolation USB Lithium Battery UPS Battery Backup

Tripp Lite SMART700HGL SmartPro 120V 700VA 450W Medical-Grade Line-Interactive Tower UPS with 4 Outlets Full Isolation USB Lithium Battery

$2,018.98
Manufacturer:Eaton / Tripp Lite
Model:SMART700HGL
Condition:New
Availability:In Stock
The Tripp Lite SMART700HGL 700VA UPS offers medical-grade power protection with lithium-ion batteries for long life and AVR to correct voltage fluctuations. Ideal for sensitive medical equipment.
Datasheet

The Tripp Lite SMART700HGL 700VA UPS is a smart AVR medical-grade unit featuring lithium iron phosphate battery technology for extended battery life and runtime. It provides reliable power protection for essential medical equipment safeguarding against power outages surges and voltage fluctuations.

This tower UPS offers automatic voltage regulation (AVR) to correct brownouts and overvoltages without using battery power extending battery life. The SMART700HGL is ideal for hospitals clinics and other healthcare facilities requiring dependable power backup for critical devices.

APPLICATIONS
UPS Applications Hospital/Medical
COMMUNICATIONS
Communications Cable USB and DB9 serial cabling included
Communications Interface USB; DB9 Serial
Network Management Card Description Network management not supported
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPSs built-in communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number SMART700HGL
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS
Grounding Details Grounding lug
High Availability UPS Features Hot swappable batteries; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint) 143
Low Voltage Transfer to Battery Power (Setpoint) 81
Transfer Time 2-4 milliseconds
OVERVIEW
UPC Code 037332192219
UPS Type Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications CSA (Canada); UL 1778; UL 60601-1
Product Compliance RoHS; FCC Part 15 Class A (USA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 940
AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power-failure overload and low-battery conditions
LED Indicators 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
VOLTAGE REGULATION
Overvoltage Correction Input voltages between 126 and 143 are reduced by 9%
Severe Undervoltage Correction Input voltages between 81 and 95 are boosted by 21%
Undervoltage Correction Input voltages between 96 and 106 are boosted by 10%
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
Battery
Battery Access Battery access door
Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90%
DC System Voltage (VDC) 36
Expandable Runtime No
Runtime Full Load (min.) 18 min. (450W)
Runtime Half Load (min.) 42 min. (225W)
Battery Type Lithium-ion (LiFePO4)
Details
Category UPS System
Environmental
AC Mode BTU / Hr. (Full Load) 97.7
AC Mode Efficiency Rating (100% Load) 94%
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load 189.1
Battery Mode Heat Dissipation (BTU/Hr) @ Half Load 114.3
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 0-95% non-condensing
Storage Temperature Range 5 to 122F (-15 to 50C)
Input
Input Circuit Breakers 10A
Input Cord Length (ft.) 6
Input Cord Length (m) 1.83
Input Phase Single-Phase
Maximum Input Amps 6
Nominal Input Voltage(s) Supported 120V AC
Rated input current (Maximum Load) 5.5A
Recommended Electrical Service 15A 120V
UPS Input Connection Type 5-15P-HG
UPS Input Cord Length (ft.) 6
UPS Input Cord Length (m) 1.8
Isolation
Leakage Current Equal to less than 100 microamps
Output Isolation Transformer Hospital grade load isolation transformer
Output
Frequency Compatibility 60 Hz
Individually Controllable Load Banks No
Nominal Output Voltage(s) Supported 115V; 120V
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
Output Capacity (kVA) 0.7
Output Capacity (kW) 0.45
Output Capacity (VA) 700
Output Capacity (Watts) 450
Output Receptacle Details Hospital grade output receptacles
Output Receptacles (4) 5-15R
Output Voltage Regulation (Battery Mode) 115V (+/- 5%)
Output Voltage Regulation (Line Mode) -18% +8%
Power Factor 0.6
Physical
Cooling Method Fan
Installation Form Factors Supported with Included Accessories Tower
Primary Form Factor Tower
Primary UPS Depth (mm) 229
Primary UPS Height (mm) 325
Primary UPS Width (mm) 191
Shipping Dimensions (hwd / cm) 43.51 x 30.51 x 34.49
Shipping Dimensions (hwd / in.) 17.13 x 12.01 x 13.58
Unit Weight (kg) 15.30
Unit Weight (lbs.) 33.7300
UPS Housing Material PVC
UPS Power Module Dimensions (hwd cm) 32.51 x 19.05 x 22.86
UPS Power Module Dimensions (hwd in.) 12.8 x 7.5 x 9
UPS Power Module Weight (kg) 15.30
UPS Power Module Weight (lbs.) 33.73
Shipping Weight (kg) 18.14
Shipping Weight (lbs.) 40.00
Warranty
Warranty/Returns 30 Days