Datasheet
The Tripp Lite RV750ULHW 750W RV Inverter/Charger provides reliable AC power for your devices while you're on the road. Featuring both 12V DC and 120V AC hardwire input/output this versatile unit ensures seamless power conversion for a variety of applications.
Enjoy convenient mobile power for your electronics and appliances with this efficient and robust inverter/charger perfect for RVs campers and other mobile setups. Its hardwire design provides a secure and permanent power solution for your travels.
| DETAIILS |
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
RV750ULHW |
| FEATURES & SPECIFICATIONS |
| Load Sensing |
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level up to 150 watts. |
| LINE / BATTERY TRANSFER |
| High Voltage Transfer to Battery Power |
In AC "auto" mode inverter/charger switches to battery mode as line voltage increases to 145V |
| Low Voltage Transfer to Battery Power |
In AC "auto" mode inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85 95 105V - see manual) |
| Transfer Time (Line Power to Battery Mode) |
16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications) |
| OVERVIEW |
| UPC Code |
037332121639 |
| STANDARDS & COMPLIANCE |
| Product Certifications |
CSA (Canada); UL 458 |
| Product Compliance |
RoHS |
| SURGE / NOISE SUPPRESSION |
| AC Suppression Joule Rating |
450 |
| USER INTERFACE ALERTS & CONTROLS |
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. |
| Battery |
| Battery Charge |
11A / 45A (selectable) |
| Battery Pack Accessory (Optional) |
98-121 sealed lead acid battery (optional) |
| DC System Voltage (VDC) |
12 |
| Expandable Runtime |
Yes |
| LVC (Low Voltage Cut-Off) |
10VDC +/-3% |
| Details |
| Category |
Power Inverters |
| Environmental |
| Relative Humidity |
0-95% non-condensing |
| Input |
| Input Connection Type |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire |
| Input Cord Length Details |
DC INPUT: User supplies cabling. 6 gauge or larger (see manual). AC INPUT: hardwire |
| Maximum Input Amps / Watts |
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 29 amps at 120V AC with full inverter and charger load (9.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output. |
| Nominal Input Voltage(s) Supported |
120V AC |
| Recommended Electrical Service |
DC INPUT: Requires 12V DC input source capable of delivering 73A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). |
| Voltage Compatibility (VAC) |
120 |
| Voltage Compatibility (VDC) |
12 |
| Output |
| Continuous Output Capacity (Watts) |
750 |
| Frequency Compatibility |
60 Hz |
| Nominal Output Voltage(s) Supported |
120V |
| Output (Watts) |
750 |
| Output Frequency Regulation |
60 Hz (+/- 0.3 Hz) |
| Output Receptacles |
Hardwire |
| Output Voltage Regulation |
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%). |
| Peak Output Capacity (Watts) |
1500 |
| Pure Sine Wave Output |
No |
| Overload Protection |
Includes 10A input breaker dedicated to the charging system |
| Physical |
| Cooling Method |
Multi-speed fan |
| Shipping Dimensions (hwd / cm) |
31.50 x 26.67 x 27.18 |
| Shipping Dimensions (hwd / in.) |
12.40 x 10.50 x 10.70 |
| Unit Dimensions (hwd / cm) |
17.78 x 22.23 x 22.86 |
| Unit Dimensions (hwd / in.) |
7.000 x 8.750 x 9.000 |
| Unit Weight (kg) |
7.26 |
| Unit Weight (lbs.) |
16 |
| Form Factors Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
| Material Of Construction |
Polycarbonate |
| Shipping Weight (kg) |
8.44 |
| Shipping Weight (lbs.) |
18.60 |
| Warranty |
| Warranty/Returns |
30 Days |
