Datasheet
The Tripp Lite RV1250ULHW 1250W Inverter/Charger provides reliable AC power for your RV appliances and electronics. Converting 12V DC battery power to 120V AC this hardwired unit delivers up to 1250 watts of continuous power and features integrated Isobar surge protection to safeguard sensitive equipment.
The hardwire input/output design allows for permanent installation delivering robust and convenient power in your RV. The RV1250ULHW also features automatic line-to-battery transfer ensuring uninterrupted power during outages or when shore power is unavailable. Its UL listing provides assurance of quality and safety.
| DETAIILS |
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
RV1250ULHW |
| FEATURES & SPECIFICATIONS |
| Load Sensing |
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level. |
| LINE / BATTERY TRANSFER |
| High Voltage Transfer to Battery Power |
In AC "auto" mode inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual) |
| Low Voltage Transfer to Battery Power |
In AC "auto" mode inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85 95 105V - see manual) |
| Transfer Time (Line Power to Battery Mode) |
16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications) |
| OVERVIEW |
| UPC Code |
037332121691 |
| STANDARDS & COMPLIANCE |
| Product Certifications |
CSA (Canada); UL 458 |
| Product Compliance |
RoHS |
| SURGE / NOISE SUPPRESSION |
| AC Suppression Joule Rating |
600 |
| USER INTERFACE ALERTS & CONTROLS |
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. |
| Battery |
| Battery Charge |
14A / 55A (selectable) |
| Battery Pack Accessory (Optional) |
98-121 sealed lead acid battery (optional) |
| DC System Voltage (VDC) |
12 |
| Expandable Runtime |
Yes |
| LVC (Low Voltage Cut-Off) |
10VDC +/-3% |
| Details |
| Category |
Power Inverters |
| Environmental |
| Relative Humidity |
0-95% non-condensing |
| Input |
| Input Connection Type |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire |
| Input Cord Length Details |
DC INPUT: User supplies cabling. 4 gauge or larger (see manual). AC INPUT: hardwire |
| Maximum Input Amps / Watts |
DC INPUT: Full continuous load - 95A at 12V DC. AC INPUT: 20 amps at 120V AC with full inverter and charger load (12A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output lo |
| Nominal Input Voltage(s) Supported |
120V AC |
| Recommended Electrical Service |
DC INPUT: Requires 12V DC input source capable of delivering 95A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive applications professional hardwire |
| Voltage Compatibility (VAC) |
120 |
| Voltage Compatibility (VDC) |
12 |
| Output |
| Continuous Output Capacity (Watts) |
1250 |
| Frequency Compatibility |
60 Hz |
| Nominal Output Voltage(s) Supported |
120V |
| Output (Watts) |
1250 |
| Output Frequency Regulation |
60 Hz (+/- 0.3 Hz) |
| Output Receptacles |
Hardwire |
| Output Voltage Regulation |
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%). |
| Peak Output Capacity (Watts) |
2500 |
| Pure Sine Wave Output |
No |
| Overload Protection |
Includes 12A input breaker dedicated to the charging system and 20A output breaker for AC output loads |
| Physical |
| Cooling Method |
Multi-speed fan |
| Shipping Dimensions (hwd / cm) |
32.00 x 26.67 x 27.18 |
| Shipping Dimensions (hwd / in.) |
12.60 x 10.50 x 10.70 |
| Unit Dimensions (hwd / cm) |
17.78 x 22.23 x 22.86 |
| Unit Dimensions (hwd / in.) |
7.000 x 8.750 x 9.000 |
| Unit Weight (kg) |
10.57 |
| Unit Weight (lbs.) |
23.3 |
| Form Factors Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
| Material Of Construction |
Polycarbonate |
| Shipping Weight (kg) |
11.34 |
| Shipping Weight (lbs.) |
25.00 |
| Warranty |
| Warranty/Returns |
30 Days |
