Datasheet
The Tripp Lite 1000W Compact Inverter converts 12V DC battery power into 120V AC household power enabling you to run electronic devices in your vehicle boat or off-grid locations. Featuring four 5-15R outlets this inverter delivers reliable power for laptops small appliances power tools and more.
Its compact metal housing ensures durability while built-in protection features safeguard connected equipment. Ideal for mobile offices emergency power and recreational activities the Tripp Lite 1000W Inverter offers a portable and convenient power solution.
| DETAIILS |
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
PV1000HF |
| OVERVIEW |
| UPC Code |
037332097187 |
| STANDARDS & COMPLIANCE |
| Product Compliance |
RoHS |
| USER INTERFACE ALERTS & CONTROLS |
| Audible Alarm |
Dual function alarm indicates overload conditions or low DC input voltage of 10.5V or less |
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on battery and connected load conditions |
| Switches |
3 position rocker switch enables on/off power control plus "remote" setting which enables inverter to be remotely powered on or off when used in conjunction with Remote Control Module (sold separately). |
| Battery |
| DC System Voltage (VDC) |
12 |
| Details |
| Category |
Power Inverters |
| Environmental |
| Relative Humidity |
0-95% non-condensing |
| Input |
| Input Connection Type |
Set of 2 DC bolt-down wiring terminals |
| Input Cord Length Details |
User supplies cabling. Minimum gauges for full load operation: #4 wire (12 ft max) #2 wire (20 ft max) #0 wire (31 ft max). |
| Maximum Input Amps / Watts |
Full continuous load - 100A at 12V DC No load - 1.5A at 12V DC Shutdown / load sense mode - 100 micro amps |
| Recommended Electrical Service |
Requires 12V DC input source capable of delivering 100A for the required duration (when used at full capacity). For automotive applications hardwire installation with 175A battery system fusing is recommended. |
| Voltage Compatibility (VDC) |
12 |
| Output |
| Continuous Output Capacity (Watts) |
1000 |
| Frequency Compatibility |
60 Hz |
| Nominal Output Voltage(s) Supported |
120V |
| Output (Watts) |
1000 |
| Output Frequency Regulation |
60 Hz (+/- 5% Hz) |
| Output Receptacles |
(4) 5-15R |
| Output Voltage Regulation |
Maintains PWM sine wave output voltage of 115 VAC (+/- 10% VAC) |
| Peak Output Capacity (Watts) |
2000 |
| Pure Sine Wave Output |
No |
| Overload Protection |
Automatic overload protection shuts down inverter system in the event of overloads. Inverter and electrical system are further protected via four internal 40A automotive fuses |
| Physical |
| Cooling Method |
Fan |
| Shipping Dimensions (hwd / cm) |
11.18 x 19.81 x 46.74 |
| Shipping Dimensions (hwd / in.) |
4.40 x 7.80 x 18.40 |
| Unit Dimensions (hwd / cm) |
10.8 x 15.24 x 33.02 |
| Unit Dimensions (hwd / in.) |
4.250 x 6.000 x 13.000 |
| Unit Weight (kg) |
2.72 |
| Unit Weight (lbs.) |
6 |
| Form Factors Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
| Material Of Construction |
Aluminum Steel |
| Shipping Weight (kg) |
3.22 |
| Shipping Weight (lbs.) |
7.10 |
| Warranty |
| Warranty/Returns |
30 Days |
