Eaton Tripp Lite Series SmartPro 1440VA 1440W 120V Line-Interactive Sine Wave UPS - 8 Outlets, Extended Run UPS

Eaton Tripp Lite Series SmartPro 1440VA 1440W 120V Line-Interactive Sine Wave UPS - 8 Outlets, Extended Run UPS

$914.96
Manufacturer:Eaton / Tripp Lite
Model:SMART1500RMXL2U
Condition:New
Availability:In Stock
The Tripp Lite SMART1500RMXL2U is a 1.5kVA/1350W line-interactive UPS with sine wave output. Featuring AVR LCD USB DB9 EPO and 2U rack/tower form factor it offers reliable power protection.
Datasheet

The Tripp Lite SMART1500RMXL2U SmartPro 1.5kVA 1350W Line-Interactive Sine Wave UPS offers comprehensive power protection for critical equipment. Its sine wave output ensures compatibility with sensitive electronics while automatic voltage regulation (AVR) corrects brownouts and overvoltages without battery drain. The 2U rack/tower design provides flexible installation options.

Featuring an LCD status display USB and DB9 connectivity for monitoring and control and an emergency power off (EPO) port for enhanced safety the SMART1500RMXL2U provides peace of mind. Extend runtime with optional external battery packs (sold separately) and gain enhanced management capabilities with the optional SNMPWEBCARD.

APPLICATIONS
UPS Applications Large Network; High-End Desktop/Small Network
COMMUNICATIONS
Communications Cable USB and DB9 cabling included
Communications Interface Contact closure; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
Emergency Power Off (EPO)/Remote On-Off (ROO) Yes
Network Management Card Description One slot for optional WEBCARDLXE web card. Note: Not compatible with WEBCARDLX
Network Monitoring Port Description Network Card Optional. Not compatible with WEBCARDLX.
Network UPS Tools (NUT) Compatibility NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite
PowerAlert Software For local monitoring via the UPSs built-in communication ports download PowerAlert Office software at https://www.tripplite.com/poweralert
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number SMART1500RMXL2U
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
Grounding Details Back panel grounding lug
High Availability UPS Features Automatic Voltage Regulation (AVR); Expandable battery backup; Hot swappable batteries; Remote management; Sine wave output; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint) 151
Low Voltage Transfer to Battery Power (Setpoint) 80 (70V in extended mode)
Transfer Time 4 milliseconds (AC to battery mode) 1 millisecond (Battery to AC mode)
OVERVIEW
UPC Code 037332120403
UPS Type Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications CSA (Canada); NOM (Mexico); UL 1778
Product Compliance RoHS; FCC Part 15 Class A (USA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 380
AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation Press the ESC (Escape) button on the front panel display to silence the alarm. Check the alarm condition and perform the applicable action to resolve the condition. If the alarm status changes the alarm beeps again overriding the previous alarm silencing
Audible Alarm Audible alarm indicates UPS startup power-failure low-battery overload UPS fault and remote shutdown conditions
Front Panel LCD Display Front panel rotatable LCD information and configuration screen offers detailed UPS and site power status and operating data plus configuration of voltage frequency operating mode alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
LED Indicators UPS status (Solid Green); Battery Mode (Solid Orange) / Battery Low Warning (Flashing Orange); Fault/Alarm (Solid Red)
Switches 5 pushbutton switches control OFF / ON power status ENTER UP and DOWN selection and ESC control functions
VOLTAGE REGULATION
Overvoltage Correction Reduces incoming voltage between 132V-151V (Normal Mode) or 138V-152V (Extended mode) by 13%
Undervoltage Correction Boost incoming voltages between 81V-102V (Normal Mode) or 71V-92V (Extended Mode) by 15%
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 80V to 151V (Normal Mode) or 70V-153V (Extended Mode)
Battery
Battery Access Front panel battery access door
Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90% (typical full load discharge)
Battery Replacement Description Hot-swappable user replaceable batteries
DC System Voltage (VDC) 48
Expandable Runtime Yes
Runtime Full Load (min.) 5.1 min. (1440w)
Runtime Half Load (min.) 15.1 min. (720w)
Battery Type Valve Regulated Lead Acid (VRLA)
Details
Category UPS System
Environmental
AC Mode BTU / Hr. (Full Load) 83
AC Mode Efficiency Rating (100% Load) 96%
Audible Noise 45 dBA maximum front side 1m
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load 504
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 0-95% non-condensing
Storage Elevation (ft.) 0-32808
Storage Temperature Range 5 to 122F (-15 to 50C)
Operating Elevation 0-10000 ft. (0-3000 m)
Input
Input Circuit Breakers 15A
Input Phase Single-Phase
Maximum Input Amps 12
Nominal Input Voltage Description 80V-151V (normal mode); adjustable to 70V-153V (extended mode)
Nominal Input Voltage(s) Supported 120V AC
Rated input current (Maximum Load) 12A
Recommended Electrical Service 15A 120V
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.1
Output
Frequency Compatibility 50 / 60 Hz
Individually Controllable Load Banks Yes
Load Management Receptacles Two switchable two-outlet 5-15R load banks
Nominal Output Voltage(s) Supported 100V; 110V; 120V; 125V
Nominal Voltage Details 120v nominal output in battery mode
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
Output Capacity (kVA) 1.44
Output Capacity (kW) 1.44
Output Capacity (VA) 1440
Output Capacity (Watts) 1440
Output Receptacles (8) 5-15R
Output Voltage Regulation (Battery Mode) -10% +6%
Output Voltage Regulation (Line Mode) 120V (-13% +15%)
Power Factor 1
Physical
Cooling Method Fan
Installation Form Factors Supported with Included Accessories 4 post 19 inch rackmount; Tower
Maximum Device Depth (cm) 44.70
Maximum Device Depth (in.) 17.6
Maximum Device Depth (mm) 447
Minimum Required Rack Depth (cm) 53.34
Minimum Required Rack Depth (inches) 21
Minimum Required Rack Depth with External Battery Pack (cm) 51
Minimum Required Rack Depth with External Battery Pack (in.) 20
Minimum Required Rack Depth without External Battery Pack (cm) 53
Minimum Required Rack Depth without External Battery Pack (in.) 21
Mounting Details Included 4-post mounting kit enables installation in 4 post racks. Two ABS mounting stands enables the UPS to be configured in an upright tower orientation.
Primary Form Factor Rackmount; Tower
Primary UPS Depth (mm) 447
Primary UPS Height (mm) 86
Primary UPS Width (mm) 437
Shipping Dimensions (hwd / cm) 24.00 x 49.80 x 58.50
Shipping Dimensions (hwd / in.) 9.45 x 19.60 x 23.03
Unit Dimensions (hwd / in.) 3.450 x 17.200 x 17.600
Unit Weight (kg) 23.00
Unit Weight (lbs.) 50.706
UPS Housing Material Steel
UPS Power Module Dimensions (hwd cm) 8.64 x 43.69 x 44.70
UPS Power Module Dimensions (hwd in.) 3.4 x 17.2 x 17.6
UPS Power Module Weight (kg) 23.00
UPS Power Module Weight (lbs.) 50.71
Rack Height 2U
Shipping Weight (kg) 28.00
Shipping Weight (lbs.) 61.73
Warranty
Warranty/Returns 30 Days