Eaton Tripp Lite Series 1500VA Smart UPS Back Up, Sine Wave, Network Card Included

Eaton Tripp Lite Series 1500VA Smart UPS Back Up, Sine Wave, Network Card Included

$1,313.64

Manufacturer:Eaton / Tripp Lite

Model:SMART1500RMXLN
Condition:New
Availability:In Stock

Qty

The Tripp Lite SMART1500RMXLN 1500VA/1350W UPS offers reliable battery backup and surge protection for critical equipment. Featuring AVR LCD display USB DB9 and SNMP/WebcardLX for network management all in a 2U rackmount form factor.

Datasheet

The Tripp Lite SMART1500RMXLN is a 1500VA/1350W Smart Online UPS system providing dependable power protection for servers networking equipment and other sensitive electronics. It offers automatic voltage regulation (AVR) to correct voltage fluctuations without using battery power extending battery life. The LCD interface displays real-time UPS status load level and battery information.

This 2U rackmount UPS features USB and DB9 serial ports for local management and includes the WebcardLX network management card enabling remote monitoring and control via SNMP web browser or telnet/SSH. Its comprehensive features make the SMART1500RMXLN ideal for ensuring business continuity in demanding network environments.

APPLICATIONS
UPS Applications	Large Network; High-End Desktop/Small Network
COMMUNICATIONS
Communications Cable	Micro-USB USB and DB9 cabling included
Communications Interface	Contact closure; DB9 Serial; EPO (emergency power off); Micro-USB; Pre-installed network card; USB (HID enabled); USB-A
Emergency Power Off (EPO)/Remote On-Off (ROO)	Yes
EPO Port	RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems
Network Management Card Description	Network management card included
Network Monitoring Port	RJ45 Network port Micro-USB Configuration/Console port USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules.
Network Monitoring Port Description	Pre-installed WEBCARDLXE supports detailed monitoring and management of UPS and site power conditions. Not compatible with WEBCARDLX.
Network UPS Tools (NUT) Compatibility	NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite
PowerAlert Software	For local monitoring via the UPSs built-in communication ports download PowerAlert Local software at https://tripplite.eaton.com/products/power-alert
SNMP Compatibility	SNMP V1 V2c V3
DETAIILS
Manufacturer	Tripp Lite
Manufacturer Part Number	SMART1500RMXLN
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure)	Cold-start operation supported
Green Energy-Saving Features	Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
Grounding Details	Rear panel grounding lug
High Availability UPS Features	Auto Probe Monitoring and Reboot (included); Automatic Voltage Regulation (AVR); Expandable battery backup; Hot swappable batteries; Remote management; Sine wave output; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint)	151
Low Voltage Transfer to Battery Power (Setpoint)	80 (adjustable to 70V)
Transfer Time	1-4ms for normal mode >5ms for sensitive mode
OVERVIEW
UPC Code	037332178022
UPS Type	Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications	CSA (Canada); NOM (Mexico); UL 1778
Product Compliance	RoHS; FCC Part 15 Class B (USA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating	380
AC Suppression Response Time	Instantaneous
EMI / RFI AC Noise Suppression	Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation	Press the ESC (Escape) button on the front panel display to silence the alarm. Check the alarm condition and perform the applicable action to resolve the condition. If the alarm status changes the alarm beeps again overriding the previous alarm silencing
Audible Alarm	Audible alarm indicates UPS startup power-failure low-battery overload UPS fault and remote shutdown conditions
Front Panel LCD Display	Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data plus configuration of voltage operating mode alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
LED Indicators	3 status-indicating LEDs (normal battery mode alarm/fault); LED colors (green = ON orange = On battery flashing orange = below warning level red = alarm/fault). LX Platform Interface Status: Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing) 100 Mbps (On steady). Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).
Switches	5 pushbutton switches control OFF / ON power status ENTER UP and DOWN selection and ESC control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
VOLTAGE REGULATION
Overvoltage Correction	Reduces incoming voltage between 132-151V by 13% (Normal Mode); 138-152V (Extended mode)
Undervoltage Correction	Boost incoming voltages between 81-102V by 15% (Normal Mode); 71-92V by 15% (Extended Mode)
Voltage Regulation Description	Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 80 to 151V (Normal Mode) or 70-153V (Extended Mode)
Battery
Battery Access	Front panel battery access door
Battery Recharge Rate (Included Batteries)	Less than 4.5 hours from 10% to 90% (typical full load discharge)
Battery Replacement Description	Hot-swappable user replaceable 48V internal battery cartridge
DC System Voltage (VDC)	48
Expandable Runtime	Yes
Runtime Full Load (min.)	5.1 min. (1440w)
Runtime Half Load (min.)	15.1 min. (720w)
Battery Type	Valve Regulated Lead Acid (VRLA)
Details
Category	UPS System
Environmental
AC Mode BTU / Hr. (Full Load)	83
AC Mode Efficiency Rating (100% Load)	96%
Audible Noise	45 dBA maximum front side 1m
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load	504
Operating Temperature Range	32 to 104F (0 to 40C)
Relative Humidity	0-95% non-condensing
Storage Elevation (ft.)	0-32808
Storage Elevation (m)	0-10000
Storage Temperature Range	5 to 122F (-15 to +50C)
Operating Elevation	0-10000 ft. (0-3000 m)
Input
Input Circuit Breakers	80V-151V; adjustable to 70-153V
Input Phase	Single-Phase
Maximum Input Amps	12
Nominal Input Voltage(s) Supported	120V AC
Rated input current (Maximum Load)	12A (120V)
Recommended Electrical Service	15A 120V
UPS Input Connection Type	5-15P
UPS Input Cord Length (ft.)	10
UPS Input Cord Length (m)	3.1
Output
Frequency Compatibility	50 / 60 Hz
Individually Controllable Load Banks	Yes
Load Management Receptacles	Two switchable two-outlet 5-15R load banks
Nominal Output Voltage(s) Supported	110V; 115V; 120V
Nominal Voltage Details	120v nominal output in battery mode
Output AC Waveform (AC Mode)	Sine wave
Output AC Waveform (Battery Mode)	Pure Sine wave
Output Capacity (kVA)	1.44
Output Capacity (kW)	1.44
Output Capacity (VA)	1440
Output Capacity (Watts)	1440
Output Receptacles	(8) 5-15R
Output Voltage Regulation (Battery Mode)	-10% +6%
Output Voltage Regulation (Line Mode)	120V (-13% +15%)
Power Factor	1
Physical
Cooling Method	Fan
Installation Form Factors Supported with Included Accessories	4 post 19 inch rackmount; Tower
Minimum Required Rack Depth (cm)	50.80
Minimum Required Rack Depth (inches)	20
Minimum Required Rack Depth with External Battery Pack (cm)	51
Minimum Required Rack Depth with External Battery Pack (in.)	20
Minimum Required Rack Depth without External Battery Pack (cm)	51
Minimum Required Rack Depth without External Battery Pack (in.)	20
Mounting Details	Included 4-post mounting kit enables installation in 4 post racks. Two ABS mounting stands enables the UPS to be configured in an upright tower orientation.
Primary Form Factor	Rackmount; Tower
Primary UPS Depth (mm)	447
Primary UPS Height (mm)	88
Primary UPS Width (mm)	447
Shipping Dimensions (hwd / cm)	24.00 x 49.80 x 58.50
Shipping Dimensions (hwd / in.)	9.45 x 19.60 x 23.03
Unit Dimensions (hwd / in.)	3.450 x 17.200 x 17.600
Unit Weight (kg)	23.00
Unit Weight (lbs.)	50.706
UPS Housing Material	Steel
UPS Power Module Dimensions (hwd cm)	8.76 x 44.70 x 44.70
UPS Power Module Dimensions (hwd in.)	3.45 x 17.6 x 17.6
UPS Power Module Weight (kg)	23.00
UPS Power Module Weight (lbs.)	50.71
Rack Height	2U
Shipping Weight (kg)	28.00
Shipping Weight (lbs.)	61.73
Warranty
Warranty/Returns	30 Days