Tripp Lite SMX1200XLHGL SmartPro Medical-Grade UPS Line Interactive Lithium Battery 6 Outlets - 230V 1kVA 750W Full Isolation
$1,991.06
Manufacturer:Eaton / Tripp Lite
Model:SMX1200XLHGL
Condition:New
Availability:In Stock
Condition:New
Availability:In Stock
- Power Protection
- Eaton / Tripp Lite
- UPS System
- SMX Series
- UPS Battery Backup
- Search
- Tripp Lite SMX1200XLHGL SmartPro Medical-Grade UPS Line Interactive Lithium Battery 6 Outlets - 230V 1kVA 750W Full Isolation
Datasheet
The Tripp Lite SMX1200XLHGL 1000VA/750W 230V Lithium-ion UPS Smart Tower is a reliable power protection solution designed for hospital medical equipment and other essential electronics. Its lithium-ion battery provides long-lasting backup power during outages while the advanced surge suppression safeguards connected devices from damaging voltage spikes.
This smart UPS features a tower form factor and offers intelligent monitoring and management capabilities. Its 230V input voltage makes it suitable for international applications ensuring continuous operation for crucial systems even in demanding environments.
| APPLICATIONS | |
| UPS Applications | Hospital/Medical |
| COMMUNICATIONS | |
| Communications Interface | USB; DB9 Serial |
| Network Management Card Description | Network management not supported |
| DETAIILS | |
| Manufacturer | Tripp Lite |
| Manufacturer Part Number | SMX1200XLHGL |
| FEATURES & SPECIFICATIONS | |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Grounding Details | Ground Potential Equalization Connector: POAG-S6/20 |
| High Availability UPS Features | Surge/noise protection |
| LINE / BATTERY TRANSFER | |
| High Voltage Transfer to Battery Power (Setpoint) | 274 |
| Low Voltage Transfer to Battery Power (Setpoint) | 155 |
| Transfer Time | 2-4 milliseconds |
| OVERVIEW | |
| UPC Code | 037332224798 |
| UPS Type | Line-Interactive |
| STANDARDS & COMPLIANCE | |
| Product Certifications | UL 60601-1 |
| Product Compliance | RoHS; CE (Europe) |
| SURGE / NOISE SUPPRESSION | |
| AC Suppression Joule Rating | 340 |
| AC Suppression Response Time | Instantaneous |
| EMI / RFI AC Noise Suppression | Yes |
| USER INTERFACE ALERTS & CONTROLS | |
| Audible Alarm | Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure overload conditions and Low Battery events using our Free Power Alert UPS management software. |
| LED Indicators | 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status |
| Switches | Yes includes 2 front panel mounted push-button switches for system enable self-test and alarm cancel functions |
| VOLTAGE REGULATION | |
| Overvoltage Correction | Input voltages between 245 and 274V AC are reduced by 9% |
| Severe Undervoltage Correction | Input voltages between 156 and 182 are boosted by 21% |
| Undervoltage Correction | Input voltages between 183 and 199 are boosted by 10% |
| Voltage Regulation Description | Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable computer grade output without consuming battery power over an input voltage range of 155 to 274V AC. |
| Battery | |
| Battery Access | Battery access door allows hot swap battery replacement without powering connected equipment off |
| Battery Recharge Rate (Included Batteries) | Less than 4.5 hours from 10% to 90% |
| DC System Voltage (VDC) | 36 |
| Expandable Runtime | No |
| Runtime Full Load (min.) | 11 min. (750W) |
| Runtime Half Load (min.) | 27.5 min. (375W) |
| Typical Battery Lifespan | 3-6 years depending on usage |
| Battery Type | Lithium-ion (LiFePO4) |
| Details | |
| Category | UPS System |
| Environmental | |
| AC Mode BTU / Hr. (Full Load) | 252.2 |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load | 252.2 |
| Operating Temperature Range | 32 to 104F (0 to 40C) |
| Relative Humidity | 0-95% non-condensing |
| Storage Temperature Range | 5 to 122F (-15 to 50C) |
| Input | |
| Input Phase | Single-Phase |
| Maximum Input Amps | 5 |
| Nominal Input Voltage(s) Supported | 230V AC |
| Rated input current (Maximum Load) | 5A |
| Recommended Electrical Service | 10A 230V |
| UPS Input Connection Type | C14 inlet |
| UPS Input Cord Length (ft.) | 0.50 |
| UPS Input Cord Length (m) | 0.2 |
| Voltage Compatibility (VAC) | 230 |
| Output | |
| Frequency Compatibility | 50 / 60 Hz |
| Frequency Compatibility Details | Automatic frequency selection |
| Individually Controllable Load Banks | No |
| Nominal Output Voltage(s) Supported | 220V; 230V; 240V |
| Nominal Voltage Details | 230v nominal inverter output voltage |
| Output AC Waveform (Battery Mode) | PWM sine wave |
| Output Capacity (kVA) | 1 |
| Output Capacity (kW) | 0.75 |
| Output Capacity (VA) | 1000 |
| Output Capacity (Watts) | 750 |
| Output Receptacles | (6) C13 |
| Output Voltage Regulation (Line Mode) | -18% +8% |
| Physical | |
| Cooling Method | UPS cooling via rear-exit fan |
| Installation Form Factors Supported with Included Accessories | Tower |
| Primary Form Factor | Tower |
| Primary UPS Depth (mm) | 231 |
| Primary UPS Height (mm) | 323 |
| Primary UPS Width (mm) | 191 |
| Shipping Dimensions (hwd / in.) | 18.50 x 12.20 x 13.38 |
| Unit Weight (kg) | 20.64 |
| Unit Weight (lbs.) | 45.500 |
| UPS Housing Material | PVC |
| UPS Power Module Dimensions (hwd in.) | 12.7 x 7.5 x 9.1 |
| UPS Power Module Weight (kg) | 20.64 |
| UPS Power Module Weight (lbs.) | 45.5 |
| Shipping Weight (kg) | 22.14 |
| Warranty | |
| Warranty/Returns | 30 Days |