Tripp Lite SMX1200XLHG SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 6 Outlets Full Isolation Expandable Runtime
$972.94
Manufacturer:Eaton / Tripp Lite
Model:SMX1200XLHG
Condition:New
Availability:In Stock
Condition:New
Availability:In Stock
- Power Protection
- Eaton / Tripp Lite
- UPS System
- SMX Series
- UPS Battery Backup
- Search
- Tripp Lite SMX1200XLHG SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 6 Outlets Full Isolation Expandable Runtime
Datasheet
The Tripp Lite SMX1200XLHG 1000VA/750W International Smart Hospital Grade UPS is a vital solution for protecting sensitive medical devices. Its Automatic Voltage Regulation (AVR) corrects voltage fluctuations without switching to battery preserving battery life for outage situations. This UPS is designed for international use with a 230V input/output and C13 outlets.
Providing 750W of power the SMX1200XLHG ensures continuous operation of essential equipment during power disruptions. Its "Hospital Grade" designation signifies its suitability for powering life-supporting medical devices and its adherence to stringent safety standards. This makes it ideal for hospitals clinics and other healthcare facilities reliant on uninterrupted power.
| APPLICATIONS | |
| UPS Applications | Hospital/Medical |
| COMMUNICATIONS | |
| Communications Interface | USB; DB9 Serial |
| Network Management Card Description | Network management not supported |
| DETAIILS | |
| Manufacturer | Tripp Lite |
| Manufacturer Part Number | SMX1200XLHG |
| FEATURES & SPECIFICATIONS | |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Grounding Details | Ground Potential Equalization Connector: POAG-S6/20 |
| High Availability UPS Features | Surge/noise protection |
| LINE / BATTERY TRANSFER | |
| High Voltage Transfer to Battery Power (Setpoint) | 274 |
| Low Voltage Transfer to Battery Power (Setpoint) | 155 |
| Transfer Time | 2-4 milliseconds |
| OVERVIEW | |
| UPC Code | 037332140425 |
| UPS Type | Line-Interactive |
| STANDARDS & COMPLIANCE | |
| Product Certifications | UL 60601-1 |
| Product Compliance | RoHS; CE (Europe) |
| SURGE / NOISE SUPPRESSION | |
| AC Suppression Joule Rating | 340 |
| AC Suppression Response Time | Instantaneous |
| EMI / RFI AC Noise Suppression | Yes |
| USER INTERFACE ALERTS & CONTROLS | |
| Audible Alarm | Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure overload conditions and Low Battery events using our Free Power Alert UPS management software. |
| LED Indicators | 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status |
| Switches | Yes includes 2 front panel mounted push-button switches for system enable self-test and alarm cancel functions |
| VOLTAGE REGULATION | |
| Overvoltage Correction | Input voltages between 245 and 274V AC are reduced by 9% |
| Severe Undervoltage Correction | Input voltages between 156 and 182 are boosted by 21% |
| Undervoltage Correction | Input voltages between 183 and 199 are boosted by 10% |
| Voltage Regulation Description | Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable computer grade output without consuming battery power over an input voltage range of 155 to 274V AC. |
| Battery | |
| Battery Access | Battery access door allows hot swap battery replacement without powering connected equipment off |
| Battery Recharge Rate (Included Batteries) | Less than 4.5 hours from 10% to 90% |
| DC System Voltage (VDC) | 36 |
| Expandable Runtime | Yes |
| Runtime Full Load (min.) | 11 min. (750W) |
| Runtime Half Load (min.) | 27.5 min. (375W) |
| Typical Battery Lifespan | 3-6 years depending on usage |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Details | |
| Category | UPS System |
| Environmental | |
| AC Mode BTU / Hr. (Full Load) | 252.2 |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load | 252.2 |
| Operating Temperature Range | 32 to 104F (0 to 40C) |
| Relative Humidity | 0-95% non-condensing |
| Storage Temperature Range | 5 to 122F (-15 to 50C) |
| Input | |
| Input Phase | Single-Phase |
| Maximum Input Amps | 5 |
| Nominal Input Voltage(s) Supported | 230V AC |
| Rated input current (Maximum Load) | 5A |
| Recommended Electrical Service | 10A 230V |
| UPS Input Connection Type | C14 inlet |
| UPS Input Cord Length (ft.) | 0.50 |
| UPS Input Cord Length (m) | 0.2 |
| Voltage Compatibility (VAC) | 230 |
| Output | |
| Frequency Compatibility | 50 / 60 Hz |
| Frequency Compatibility Details | Automatic frequency selection |
| Individually Controllable Load Banks | No |
| Nominal Output Voltage(s) Supported | 220V; 230V; 240V |
| Nominal Voltage Details | 230v nominal inverter output voltage |
| Output AC Waveform (Battery Mode) | PWM sine wave |
| Output Capacity (kVA) | 1 |
| Output Capacity (kW) | 0.75 |
| Output Capacity (VA) | 1000 |
| Output Capacity (Watts) | 750 |
| Output Receptacles | (6) C13 |
| Output Voltage Regulation (Line Mode) | -18% +8% |
| Physical | |
| Cooling Method | UPS cooling via rear-exit fan |
| Installation Form Factors Supported with Included Accessories | Tower |
| Primary Form Factor | Tower |
| Primary UPS Depth (mm) | 231 |
| Primary UPS Height (mm) | 323 |
| Primary UPS Width (mm) | 191 |
| Shipping Dimensions (hwd / cm) | 46.99 x 30.99 x 33.99 |
| Shipping Dimensions (hwd / in.) | 18.50 x 12.20 x 13.38 |
| Unit Weight (kg) | 20.64 |
| Unit Weight (lbs.) | 45.5000 |
| UPS Housing Material | PVC |
| UPS Power Module Dimensions (hwd cm) | 32.26 x 19.05 x 23.11 |
| UPS Power Module Dimensions (hwd in.) | 12.7 x 7.5 x 9.1 |
| UPS Power Module Weight (kg) | 20.64 |
| UPS Power Module Weight (lbs.) | 45.5 |
| Shipping Weight (kg) | 22.14 |
| Shipping Weight (lbs.) | 48.80 |
| Warranty | |
| Warranty/Returns | 30 Days |