Tripp Lite SMART5000RT3U SmartPro 208 & 120V 5kVA 4kW Line-Interactive Sine Wave UPS 6U Extended Run Network Card Options USB DB9 UPS Battery Backup

Tripp Lite SMART5000RT3U SmartPro 208 & 120V 5kVA 4kW Line-Interactive Sine Wave UPS 6U Extended Run Network Card Options USB DB9

$3,963.10
Manufacturer:Eaton / Tripp Lite
Model:SMART5000RT3U
Condition:New
Availability:In Stock
The Tripp Lite smart5000rt3u is a 5000VA/4000W Smart Online UPS with AVR offering 208V/120V output USB & DB9 connectivity and 6U rackmount design for reliable network power protection.
Datasheet

The Tripp Lite smart5000rt3u is a 5000VA/4000W Smart Online UPS system designed for critical network and server applications. It features Automatic Voltage Regulation (AVR) to correct voltage fluctuations without using battery power extending battery life. Its 6U rackmount form factor makes it suitable for server rooms and network closets.

This UPS provides reliable 208V/120V output USB and DB9 communication ports for monitoring and management and offers advanced features like network card compatibility for remote control. Ensure continuous uptime and protect your valuable equipment with the smart5000rt3u.

APPLICATIONS
UPS Applications Large Network
COMMUNICATIONS
Communications Cable USB and DB9 cabling included
Communications Interface Contact closure; DB9 Serial; USB
Network Management Card Description Network management card optional
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions; 2 USB ports 1 DB9 serial and 1 DB9 contact closure port (4 total)
PowerAlert Software For local monitoring via the UPSs built-in communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert
WatchDog Compatibility Supports Watchdog application OS and hard-reboot restart options for remote applications
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number smart5000rt3u
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
Grounding Details Back panel grounding lug
High Availability UPS Features Automatic Voltage Regulation (AVR); Hot swappable batteries; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint) 260
Low Voltage Transfer to Battery Power (Setpoint) 151
Transfer Time 2-4 milliseconds
OVERVIEW
UPC Code 037332099242
UPS Type Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications CSA (Canada); NOM (Mexico); UL 1778
Product Compliance RoHS; FCC Part 15 Class A (USA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 1020
AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power-failure overload and low-battery conditions
LED Indicators 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
VOLTAGE REGULATION
Overvoltage Correction Input voltages between 240V and 260 are reduced by 12%
Severe Undervoltage Correction Input voltages between 151V and 179 are boosted by 24%
Undervoltage Correction Input voltages between 180V and 199 are boosted by 12%
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 260
Battery
Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% (typical full load discharge)
Battery Replacement Description Hot-swappable user replaceable batteries
DC System Voltage (VDC) 48
Expandable Runtime Yes
Runtime Full Load (min.) 16 min. (4000W)
Runtime Half Load (min.) 38 min. (2000W)
Battery Type Valve Regulated Lead Acid (VRLA)
Details
Category UPS System
Environmental
AC Mode Efficiency Rating (100% Load) 94%
Audible Noise 45 dBA maximum front side 1m
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load 1518
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 0-95% non-condensing
Storage Temperature Range 5 to 122F (-15 to 50C)
Input
Input Circuit Breakers 30A double-pole
Input Phase Single-Phase
Maximum Input Amps 24
Nominal Input Voltage(s) Supported 208V AC
Rated input current (Maximum Load) 24A max. in factory L6-30P configuration; 27A max. when powered by 50A plug or hardwire input
Recommended Electrical Service 30A 208V
UPS Input Connection Type L6-30P
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.1
Output
Frequency Compatibility 60 Hz
Individually Controllable Load Banks Yes
Load Management Receptacles Eight switchable single-outlet 5-15R load banks
Nominal Output Voltage(s) Supported 110V; 115V; 120V; 208V
Nominal Voltage Details 208/120V nominal output in battery mode
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
Output Capacity (kVA) 5
Output Capacity (kW) 4
Output Capacity (VA) 5000
Output Capacity (Watts) 4000
Output Capacity Details Maximum output increases to 4800W when hardwire or user-supplied 50A rated input plug is used
Output Circuit Breakers 15A branch rated (x3) - 2 breakers support 5 5-15R outlets each one breaker supports 2 5-20R outlets L6-30R and L14-30R outlets are unbreakered
Output Receptacles (10) 5-15R; (2) 5-15/20R; (1) L14-30R; (1) L6-30R
Output Voltage Regulation (Battery Mode) +/- 5%
Output Voltage Regulation (Line Mode) 208 & 120V (-10% / +10%)
Power Factor 0.8
Physical
Mounting Details Set of two included 4POSTRAILKIT mounting brackets enables installation of UPS and Battery Pack in 4 post racks from 20.5 to 36 inches (521 to 914mm)
Primary Form Factor Rackmount
Unit Weight (kg) 145.88
Unit Weight (lbs.) 321.62
Warranty
Warranty/Returns 30 Days