Call us: 713-597-6988
Email: [email protected]
0 item(s)$0.00 Shopping cart

  • Your shopping cart is empty!

Tripp Lite SMART1200XLHGL SmartPro 120V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 4 Outlets Full Isolation USB Lithium Battery UPS Battery Backup

Tripp Lite SMART1200XLHGL SmartPro 120V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 4 Outlets Full Isolation USB Lithium Battery

$2,206.39
Manufacturer:Eaton / Tripp Lite
Model:SMART1200XLHGL
Condition:New
Availability:In Stock
The Tripp Lite SMART1200XLHGL 1000VA/750W UPS system provides safe reliable battery backup and surge protection for essential medical equipment using advanced lithium-ion battery technology.
Datasheet

The Tripp Lite SMART1200XLHGL 1000VA/750W UPS System is a medical-grade power solution designed to protect critical equipment in healthcare settings. Its lithium iron phosphate battery offers extended runtime and long lifespan while the tower form factor maximizes space efficiency. It offers USB connectivity for monitoring and management.

This UPS offers advanced surge protection and reliable battery backup power to safeguard connected devices from power fluctuations outages and surges. Its compliance with medical safety standards ensures suitability for demanding healthcare environments providing peace of mind for essential equipment operation.

APPLICATIONS
UPS Applications Hospital/Medical
COMMUNICATIONS
Communications Cable USB and DB9 serial cabling included
Communications Interface USB; DB9 Serial
Network Management Card Description Network management not supported
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPSs built-in communication ports download PowerAlert software at https://tripplite.eaton.com/products/power-alert
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number SMART1200XLHGL
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
Grounding Details Grounding lug (equipotential)
High Availability UPS Features Hot swappable batteries; Surge/noise protection
LINE / BATTERY TRANSFER
High Voltage Transfer to Battery Power (Setpoint) 143
Low Voltage Transfer to Battery Power (Setpoint) 81
Transfer Time 2-4 milliseconds
OVERVIEW
UPC Code 037332192202
UPS Type Line-Interactive
STANDARDS & COMPLIANCE
Product Certifications CSA (Canada); UL 1778; UL 60601-1
Product Compliance RoHS; FCC Part 15 Class A (USA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 940
AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
USER INTERFACE ALERTS & CONTROLS
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced alarm will re-sound to indicate low-battery status
Audible Alarm Factory-muted audible alarm indicates power-failure overload and low-battery conditions
LED Indicators 5 LEDs indicate line power battery power overload voltage regulation and battery low/replace status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
VOLTAGE REGULATION
Overvoltage Correction Input voltages between 126 and 143 are reduced by 9%
Severe Undervoltage Correction Input voltages between 81 and 95 are boosted by 21%
Undervoltage Correction Input voltages between 96 and 106 are boosted by 10%
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
Battery
Battery Access Battery access door
Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90%
DC System Voltage (VDC) 36
Expandable Runtime No
Runtime Full Load (min.) 10 min. (750W)
Runtime Half Load (min.) 28 min. (375W)
Battery Type Lithium-ion (LiFePO4)
Details
Category UPS System
Environmental
AC Mode BTU / Hr. (Full Load) 162.8
AC Mode Efficiency Rating (100% Load) 94%
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load 315.2
Battery Mode Heat Dissipation (BTU/Hr) @ Half Load 190.5
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 0-95% non-condensing
Storage Temperature Range 5 to 122F (-15 to 50C)
Input
Input Circuit Breakers 15A
Input Cord Length (ft.) 6
Input Cord Length (m) 1.83
Input Phase Single-Phase
Maximum Input Amps 9
Nominal Input Voltage(s) Supported 120V AC
Rated input current (Maximum Load) 9.2A
Recommended Electrical Service 15A 120V
UPS Input Connection Type 5-15P-HG
UPS Input Cord Length (ft.) 6
UPS Input Cord Length (m) 1.8
Isolation
Leakage Current Less than 100 microamps
Output Isolation Transformer Hospital grade load isolation transformer
Output
Frequency Compatibility 60 Hz
Individually Controllable Load Banks No
Nominal Output Voltage(s) Supported 115V; 120V
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
Output Capacity (kVA) 1
Output Capacity (kW) 0.75
Output Capacity (VA) 1000
Output Capacity (Watts) 750
Output Receptacle Details Hospital grade output receptacles
Output Receptacles (4) 5-15R
Output Voltage Regulation (Battery Mode) 115V (+/- 5%)
Output Voltage Regulation (Line Mode) -18% +8%
Power Factor 0.8
Physical
Cooling Method Fan
Installation Form Factors Supported with Included Accessories Tower
Primary Form Factor Tower
Primary UPS Depth (mm) 241
Primary UPS Height (mm) 318
Primary UPS Width (mm) 191
Shipping Dimensions (hwd / cm) 43.18 x 28.96 x 33.27
Shipping Dimensions (hwd / in.) 17.00 x 11.40 x 13.10
Unit Weight (kg) 15.24
Unit Weight (lbs.) 33.6000
UPS Housing Material PVC
UPS Power Module Dimensions (hwd cm) 31.75 x 19.05 x 24.13
UPS Power Module Dimensions (hwd in.) 12.5 x 7.5 x 9.5
UPS Power Module Weight (kg) 15.24
UPS Power Module Weight (lbs.) 33.6
Shipping Weight (kg) 16.57
Shipping Weight (lbs.) 36.54
Warranty
Warranty/Returns 30 Days