Call us: 713-597-6988
Email: [email protected]
0 item(s)$0.00 Shopping cart

  • Your shopping cart is empty!

Tripp Lite PDUMNH30HVAT2 5.8kW 208/240V Single-Phase ATS/Monitored PDU - 16 C13 2 C19 & 1 L6-30R Outlets Dual L6-30P Inputs 10 ft. Cords 2U TAA PDU Series

Tripp Lite PDUMNH30HVAT2 5.8kW 208/240V Single-Phase ATS/Monitored PDU - 16 C13 2 C19 & 1 L6-30R Outlets Dual L6-30P Inputs 10 ft. Cords 2U TAA

$1,043.54
Manufacturer:Eaton / Tripp Lite
Model:PDUMNH30HVAT2
Condition:New
Availability:In Stock
The Tripp Lite PDUMNH30HVAT2 5.8kW ATS/Monitored PDU provides redundant power to critical equipment. Features 16 C13 2 C19 & 1 L6-30R outlets dual L6-30P inputs and 10ft. cords in a 2U TAA-compliant form factor.
Datasheet

The Tripp Lite PDUMNH30HVAT2 5.8kW 208/240V Single-Phase ATS/Monitored PDU ensures continuous uptime for connected devices. It offers 16 C13 two C19 and one L6-30R outlet powered by redundant L6-30P inputs with included 10-foot cords. The 2U rackmount design saves valuable space.

This TAA-compliant PDU provides automatic transfer switching between primary and secondary power sources minimizing downtime during power failures. Monitoring capabilities allow for efficient power management. Ideal for critical applications requiring reliable and redundant power distribution.

COMMUNICATIONS
Communications Cable Micro-USB- to-USB A configuration/console Access cable
Communications Interface (1) DB9 Serial; (1) Micro-USB; (1) Pre-installed network card; (1) RJ45 Network; (1) USB-A
Network Compatibility 10 Mbps; 100 Mbps (Fast Ethernet)
Network Monitoring Port RJ45 Network port Micro-USB Configuration port USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules.
Network Speed Details 10 / 100
PowerAlert Software LX Platform Interface: PowerAlert Device Manager
SNMP Compatibility Yes
DETAIILS
Manufacturer Tripp Lite
Manufacturer Part Number PDUMNH30HVAT2
FEATURES & SPECIFICATIONS
High Availability PDU Features Auto-Transfer Switching
OVERVIEW
PDU Type Auto-Transfer Switch; Local Metered; Monitored
UPC Code 037332261434
STANDARDS & COMPLIANCE
Product Certifications NOM (Mexico); UL 60950-1
Product Compliance RoHS; FCC Part 15 Class A (USA); Trade Agreements Act (TAA)
SURGE / NOISE SUPPRESSION
Automatic Shut-Off No
USER INTERFACE ALERTS & CONTROLS
Front Panel LCD Display Digital display reports output amps in 4 separately metered loading segments (BANK 1: Outlets #1-9; BANK 2: Outlets #10-18; BANK 3: Outlet #19) whole-PDU output kW load level and input voltage on primary and secondary input lines and IP address. Temp and Humidity will display if optional Envirosense2 modules are attached.
LED Indicators Front panel LEDs confirms amp / kilowatt / voltage reporting information along with active primary and secondary input source status
Switches ENTER and MODE switches toggle the digital display to show output amps (Banks 1-4) total kW output and input voltage (primary secondary) and IP address.
Details
Category Power Distribution Units (PDUs)
Environmental
Operating Temperature Range 32 to 104F (0 to 40C)
Relative Humidity 5% to 95% non-condensing
Storage Temperature Range -22 to 122F (-30 to 50C)
Operating Elevation 0-10000 ft. (0-3000 m)
Input
Input Cord Details Set of two inputs connect to separate PRIMARY and SECONDARY power sources
Input Cord Length (ft.) 10
Input Cord Length (m) 3.05
Input Phase Single-Phase
Maximum Input Amps 30
Maximum Input Amps Details Agency de-rated to 24A continuous
PDU Input Voltage 200; 208; 240
PDU Plug Type (2) NEMA L6-30P
Recommended Electrical Service 30A 208V
Output
Frequency Compatibility 50 / 60 Hz
Output Capacity (kW) 5.8
Output Capacity Details 5kW (208/240V) 4.8kW (200V) total capacity / 30A max (Agency de-rated to 24A) 24A max per L6-30R outlet; 20A max per breakered outlet bank; 16A max per C19 outlet; 12A max per C13 outlet
Output Nominal Voltage 200V; 208V; 240V
Output Receptacles (16) C13; (2) C19; (1) L6-30R
Overload Protection Includes two 20A output circuit breakers; Breaker 1 controls the upper row of 9 outlets (8 C13 1 C19); Breaker 2 controls the lower row of outlets (8 C13 1 C19); L6-30R outlet is unbreakered
Physical
Minimum Required Rack Depth (cm) 40.64
Minimum Required Rack Depth (inches) 16
PDU Form Factor Horizontal (2U)
Shipping Dimensions (hwd / in.) 7.80 x 16.70 x 20.20
Unit Dimensions (hwd / cm) 8.8 x 44.4 x 31.7
Unit Dimensions (hwd / in.) 3.500 x 17.500 x 12.500
Unit Weight (kg) 6.21
Unit Weight (lbs.) 13.7
Form Factors Supported 2U rackmount
Material Of Construction Metal
Rack Height 2U
Shipping Weight (kg) 7.85
Warranty
Warranty/Returns 30 Days