Datasheet
The Tripp Lite PDUMH30-ISO Metered Distribution Unit with ISOBAR Surge Protection provides reliable power distribution and superior surge protection for critical equipment. This 1U rackmount PDU features twelve 5-15/20R outlets ideal for connecting servers network devices and other electronics within a rack enclosure. It receives power via a L5-30P input connection.
The integrated ISOBAR surge suppression safeguards connected equipment from damaging voltage spikes and transients. Metered outlets allow for monitoring of power consumption helping prevent overloads and optimize energy efficiency. The PDUMH30-ISO is a robust and space-saving solution for powering and protecting valuable electronics.
| DETAIILS |
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
PDUMH30-ISO |
| FEATURES & SPECIFICATIONS |
| Grounding |
Rear grounding lug |
| OVERVIEW |
| PDU Type |
Local Metered |
| UPC Code |
037332255907 |
| STANDARDS & COMPLIANCE |
| Product Certifications |
CAN/CSA-C22.2 No. 269.3 (Canada); CAN/CSA-C22.2 No. 62368-1 (Canada); IEC 62368-1; NOM (Mexico); RETIE (Colombia); UL 1363; UL 1449 |
| Product Compliance |
RoHS |
| SURGE / NOISE SUPPRESSION |
| AC Suppression Joule Rating |
3840 |
| AC Suppression Response Time |
NM = 0 ns. CM = <1 ns |
| AC Suppression Surge Current Rating |
60000 amps |
| Automatic Shut-Off |
No |
| Clamping Voltage (RMS) |
140 |
| EMI / RFI Filtering |
40-80 dB |
| Immunity |
Conforms to IEEE 587 / ANSI C62.41 |
| Protection Modes |
Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression |
| USER INTERFACE ALERTS & CONTROLS |
| Front Panel LCD Display |
Two digit current meter reports PDU output load in amps |
| LED Indicators |
Set of 3 diagnostic LEDs continuously report status for LINE OK (green) suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) |
| Switches |
No power switch |
| Details |
| Category |
Power Distribution Units (PDUs) |
| Environmental |
| Operating Temperature Range |
32 to 104F (0 to 40C) |
| Relative Humidity |
5% to 95% non-condensing |
| Storage Temperature Range |
-22 to 122F (-30 to 50C) |
| Operating Elevation |
0-10000 ft. (0-3000 m) |
| Input |
| Input Cord Length (ft.) |
15 |
| Input Cord Length (m) |
4.57 |
| Input Phase |
Single-Phase |
| Maximum Input Amps |
30 |
| Maximum Input Amps Details |
Agency de-rated to 24A continuous |
| PDU Input Voltage |
120V |
| PDU Plug Type |
NEMA L5-30P |
| Recommended Electrical Service |
Single-phase 30A 120V service |
| Output |
| Frequency Compatibility |
50 / 60 Hz |
| Output Capacity (kW) |
2.88 |
| Output Capacity Details |
2.88kW (120V) / 20A total capacity per bank; 16A max per 5-15/20R outlet |
| Output Nominal Voltage |
120V |
| Output Receptacles |
(12) 5-15/20R |
| Overload Protection |
20A circuit breaker |
| Physical |
| Minimum Required Rack Depth (cm) |
24.13 |
| Minimum Required Rack Depth (inches) |
9.5 |
| PDU Form Factor |
Horizontal (1U) |
| Receptacle Color |
Black |
| Shipping Dimensions (hwd / in.) |
20.28 x 11.22 x 3.07 |
| Unit Dimensions (hwd / cm) |
4.37 x 47.90 x 12.27 |
| Unit Dimensions (hwd / in.) |
18.860 x 4.830 x 1.720 |
| Unit Weight (kg) |
4.00 |
| Unit Weight (lbs.) |
8.82 |
| Form Factors Supported |
1U rackmount 0U vertical rackmount wall-mount and under-counter installation |
| Material Of Construction |
Metal |
| Rack Height |
1U |
| Shipping Weight (kg) |
4.45 |
| Warranty |
| Warranty/Returns |
30 Days |
